NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)

- 2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)

- - Fuel cut switch (https://www.nopistons.com/2nd-generation-specific-17/fuel-cut-switch-1487/)

I need the fuel cutoff switch because im putting in a downpipe and new exhaust. I really dont have the money to buy one from mazdatrix so i was wondering if anyone can point me in the right direction on how to make one so i dont blow my rear rotor.

you can make your own but i would probably just get a racingbeat......

thanks ace, I'm gonna try that tonight and I also found on there that you can make a blow off valve for about $10 and all the parts you need are at home depot.

Quote:

Originally Posted by Turbo II' date='April 24 2002,13:33

thanks ace, I'm gonna try that tonight and I also found on there that you can make a blow off valve for about $10 and all the parts you need are at home depot.

Good luck. As vosko has found out, it doesn't take alot of money to make TII"s fast. https://www.nopistons.com/forums/pub...DIR#>/wink.png

Quote:

Originally Posted by 13BAce' date='April 23 2002,13:50

[quote name='Turbo II' date='April 24 2002,13:33']thanks ace, I'm gonna try that tonight and I also found on there that you can make a blow off valve for about $10 and all the parts you need are at home depot.

Good luck. As vosko has found out, it doesn't take alot of money to make TII"s fast. https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote]

who me :smilewinkgrin:

Quote:

Originally Posted by vosko' date='April 24 2002,15:22

[quote name='13BAce' date='April 23 2002,13:50'][quote name='Turbo II' date='April 24 2002,13:33']thanks ace, I'm gonna try that tonight and I also found on there that you can make a blow off valve for about $10 and all the parts you need are at home depot.

Good luck. As vosko has found out, it doesn't take alot of money to make TII"s fast. https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote]

who me :smilewinkgrin:[/quote]

No, the other vosko.

Quote:

Originally Posted by 13BAce' date='April 24 2002,10:50

I just decided I'm gonna shell out the $100 and buy one from mazdatrix. Ill make my wasy down their this afternoon. But hey, I'm gonna make my own blowoff valve for about $10. I read about it on teamfc3s.org. Pretty cool stuff there too

Quote:

Originally Posted by ILUVMY88CABRIO' date='April 24 2002,04:02

[quote name='13BAce' date='April 24 2002,10:50'][quote name='Turbo II' date='April 24 2002,13:33']thanks ace, I'm gonna try that tonight and I also found on there that you can make a blow off valve for about $10 and all the parts you need are at home depot.

Good luck. As vosko has found out, it doesn't take alot of money to make TII"s fast. https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote]

What kind of ETs did you run in your last TII Vosko?[/quote]

my best et is 13.90 @ 99.87MPH @ low boost. i'm looking for low 13's when i crank the boost to 14-15psi, run race gas, get my apexi n1 catback *should be here this coming week after month and a half of waiting https://www.nopistons.com/forums/pub...DIR#>/wink.png* also waiting my greddy TVVC manual boost controller. i have zero top end power with my stock catback on the car. if i put the slicks from my FD on the TII i might even run a high 12 :sigh: you too can be part of the vosko budget racer club for only $4000 :smilewinkgrin: yesterday i ran 14.0 @ 100.5 mph but the stupid domestics oiled down the track like 20 times so my 60ft times sucked 2.2,2.1,2.3 those are on my kumho 712's. i might invest in some nitto 555r drag radials depending....