NoPistons -Mazda Rx7 & Rx8 Rotary Forum
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   frozen/rounded lug nut, what do I do? (https://www.nopistons.com/2nd-generation-specific-17/frozen-rounded-lug-nut-what-do-i-do-59918/)

j9fd3s 06-16-2006 10:12 AM
yeah it actually will pop right out if you hit it with a hammer

Baldy 06-16-2006 11:13 AM
Awesome. What is the back of the stud like? Would I be able to cut the back off, and just pop the stud and lug nut right through the wheel?

banzaitoyota 06-16-2006 11:34 AM
Think of the stud like a big pin. It has a shallow flat head to hold it against the seating surface. The Shoulder is knurled for a friction fit in the hole (prevents rotation) then you have the thredade portion that the lug screws too

Baldy 06-16-2006 11:48 AM
Ok. If I can, I'll just drill from the back, that way any slip won't immediately tear up the wheel. That is, if I can get access to that spot on a drill press.

j9fd3s 06-16-2006 02:55 PM
Originally Posted by Baldy' post='824592' date='Jun 16 2006, 09:48 AM

Ok. If I can, I'll just drill from the back, that way any slip won't immediately tear up the wheel. That is, if I can get access to that spot on a drill press.


i think you can if you pop off the whole hub assembly

Keegan 06-17-2006 04:49 AM
My car is on ramps and not driving for a few more days, if you need me to, I can pull off my wheel and give you some kind of idea of what is possible. It's been at least a year since I even put brakes on the car, so I really don't remember what order the parts go on. I'm afraid though, that even with the knuckle off, you won't be able to get the hub out, unless you have already done the hub mod for replaceable bearings.



I can check on this for you later this weekend if you haven't figured anything out yet.

Baldy 06-19-2006 08:53 AM
Originally Posted by Keegan' post='824712' date='Jun 17 2006, 05:49 AM

My car is on ramps and not driving for a few more days, if you need me to, I can pull off my wheel and give you some kind of idea of what is possible. It's been at least a year since I even put brakes on the car, so I really don't remember what order the parts go on. I'm afraid though, that even with the knuckle off, you won't be able to get the hub out, unless you have already done the hub mod for replaceable bearings.



I can check on this for you later this weekend if you haven't figured anything out yet.
That would be awesome, the earliest I can get to mine would most likely be Wednesday.


All times are GMT -5. The time now is 09:40 AM.
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands