Does anyone know where i can get a front spoiler for my 8810th. i would like to get a 89-91 or aftermarket ,thats not so expensive. any help is much appreciated. thanx in advance....kid00RX7 https://www.nopistons.com/forums/pub...#>/BURNOUT.gif
|
Just look around a little, even the links at the top of the forums lead to places which sell good kits.
BUT! I know laziness all too well, so here ya go |
go here to get a FEED replica... http://www.teamfc3s.org/forum/showthread.p...=&threadid=5838 it'll look great and they can be attached to the S4...$300
some guys have recently purchased the stock 89-91 lip from the dealer for around $300-350 |
demonspeed.com sells one for under $200. But he has been known to run a questionable operation, so proceed with caution. I believe corksport.com also sells a splitter, might be the feed replica.
|
MikeL sells a nice one too
|
Originally Posted by Erik' date='Nov 28 2002, 06:26 PM
...some guys have recently purchased the stock 89-91 lip from the dealer for around $300-350
new prepainted series five one piece lip........ https://www.nopistons.com/forums/pub...DIR#>/cool.png |
mikeL makes a very good spoiler... Demonspeed is crook
corksport makes a mazdaspped front lip replica |
Originally Posted by Cheers!' date='Mar 10 2003, 06:06 PM
mikeL makes a very good spoiler... Demonspeed is crook
corksport makes a mazdaspped front lip replica and the corksport is a true mazdaspeed lip...hence the 450+ tag... |
where is a pic of this MikeL spec spoiler?
if its in that TeamFC3 link from above it no workie. |
Originally Posted by amp' date='Mar 10 2003, 10:48 PM
just ordered one of three left available...
new prepainted series five one piece lip........ https://www.nopistons.com/forums/pub...DIR#>/cool.png |
Originally Posted by Rob x-7' date='Mar 10 2003, 03:21 PM
where is a pic of this MikeL spec spoiler?
if its in that TeamFC3 link from above it no workie. mike *as long as its not involving, running, lifting or other non lazy effort |
That looks good for $150. I was going to get the small stock lip which is missing but maybe I'll buy this instead.
|
I like that for $175 shipped.
|
Originally Posted by FCmaniac' date='Mar 11 2003, 12:20 AM
That looks good for $150. I was going to get the small stock lip which is missing but maybe I'll buy this instead.
At the halloween cruise...a very nice 88 10th AE had that lip...looked sweet...buuuuuuut, once it got cruising on the highway the lip flapped like kah-razy! I don't think that the middle section is directly connected to the nose, and the turbulance of wind made it shake voilently...One or two people on the other forum noticed this on their lip as well... Rob was cruising in the same group...but not sure if he looked back and saw it... |
Man that looks great. But I still think im gonna go with the gpsports front end https://www.nopistons.com/forums/pub...IR#>/happy.png
|
i like the lip that mike makes and the mazdaspeed lip too....just depends on price/taste
|
not to post *****.....but our sponsor rotaryextreme sells a mazdaspeed version for 250...which is reasonable
|
Originally Posted by Erik' date='Mar 10 2003, 08:34 PM
just my observation on the MikeL/Demonspeed lip:
At the halloween cruise...a very nice 88 10th AE had that lip...looked sweet...buuuuuuut, once it got cruising on the highway the lip flapped like kah-razy! I don't think that the middle section is directly connected to the nose, and the turbulance of wind made it shake voilently...One or two people on the other forum noticed this on their lip as well... Rob was cruising in the same group...but not sure if he looked back and saw it... |
Originally Posted by Erik' date='Mar 10 2003, 08:34 PM
just my observation on the MikeL/Demonspeed lip:
At the halloween cruise...a very nice 88 10th AE had that lip...looked sweet...buuuuuuut, once it got cruising on the highway the lip flapped like kah-razy! I don't think that the middle section is directly connected to the nose, and the turbulance of wind made it shake voilently...One or two people on the other forum noticed this on their lip as well... Rob was cruising in the same group...but not sure if he looked back and saw it... It bounces up and down so wildly I dont know how it falls off. It definitly doesnt do any good at highway speeds bouncing the way it does. I know there is nothing in the middle of the car under there to bolt it to, only thing I can see is somehow running a bracket up to the structural bumper itself. I dont want it if its going to shake like that, which car were you Erik? |
Originally Posted by Rob x-7' date='Mar 11 2003, 10:02 PM
which car were you Erik?
|
MikeL has a mold for s5 lips... you can order either.
the lines match up perfect for a s5 CORK SPORT "Type MS" Front Lip Spoiler (89-91) This piece is a direct replica of the Mazdaspeed front lip. Constructed of high quality hand laid fiberglass. Fits S5 model (89-92). price 199 |
oh you mean this car? lol.....
I dont know names, sorry! |
I want your vert rob lol
|
Originally Posted by Apex13B' date='Mar 11 2003, 09:13 PM
I want your vert rob lol
and I can get my Enkei Aegis wheels. If I ever get the title back from the damm DMV, lol. Eh, Im in no rush anyhow. |
Originally Posted by Rob x-7' date='Mar 11 2003, 05:02 PM
[quote name='Erik' date='Mar 10 2003, 08:34 PM'] just my observation on the MikeL/Demonspeed lip:
At the halloween cruise...a very nice 88 10th AE had that lip...looked sweet...buuuuuuut, once it got cruising on the highway the lip flapped like kah-razy! I don't think that the middle section is directly connected to the nose, and the turbulance of wind made it shake voilently...One or two people on the other forum noticed this on their lip as well... Rob was cruising in the same group...but not sure if he looked back and saw it... It bounces up and down so wildly I dont know how it falls off. It definitly doesnt do any good at highway speeds bouncing the way it does. I know there is nothing in the middle of the car under there to bolt it to, only thing I can see is somehow running a bracket up to the structural bumper itself. I dont want it if its going to shake like that, which car were you Erik? [/quote] I'm canceling my order.... thats all i need is a big lip flapping up and down at speed and I'm not making some custom bracket for support. F*&K!! https://www.nopistons.com/forums/pub..._DIR#>/dry.png |
I was also sad when Erik told me this news, words cannot describe the way
this thing was bouncing up and down perfectly, it never stopped, it just keeps on bouncing....bouncing.......bouncing |
hahaha, great! I cant get them to respond to email now and there is NO phone # on their website. Anyone have a phone # for the TeamFC3S store?
|
All times are GMT -5. The time now is 05:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands