Ok guys,
Yes I can go out and buy a kit for this....but man I cannot see how paying over $1000 for a kit is worth it. Hell I got my TII for $1000. So one of my future upgrades is going to be a Turbo Upgrade (Stage 3 or 4 by Majestic). And of course from what I understand the TMIC will not be good enough for this. Has anyone in here done a DIY FMIC? If you have please post how you did this and the parts you used. Did you take a intercooler from another car and put it on, or make the intercooler? Anyway I think if someone in here can explain this then a ton of people will be interested....and hopefully more people will do it and make a kind of how-to for it and possible a best practice on DIY FMIC |
ok guys just to get everyone started check this out:
http://www.roadraceengineering.com/intercoolers.htm |
Alot of ppl us intercoolers form NPR, Starions, thats what im trying to find.
|
Really,
Are there any writeups on how to do this? I'm sure we could find some of these at a junkyard |
i'm running a NPR fmic. its not too hard nor too easy to install and you need custom intercooler piping which is annoying. all in all you probably save maybe $300 over getting a complete kit
|
http://nopistons.net/albums/album24/adi.sized.jpg
I just got my Starion IC a few days ago. I am not looking forward to putting this bitch in, and doing all the plumbing. Vosko, have you done the plumbing for your NPR IC yet? Right now I'm in my IC set up a little over $375 ($185 for the IC, and $190 for the BOV). HKS sells all the pipes that you need for the install. |
That's a really nice IC...how much is the piping?
|
yea how much is the piping?
|
Originally Posted by ILUVMY88CABRIO' date='Aug 1 2002, 04:44 PM
http://nopistons.net/albums/album24/adi.sized.jpg
I just got my Starion IC a few days ago. I am not looking forward to putting this bitch in, and doing all the plumbing. Vosko, have you done the plumbing for your NPR IC yet? Right now I'm in my IC set up a little over $375 ($185 for the IC, and $190 for the BOV). HKS sells all the pipes that you need for the install. |
There's a custom bending place in Des Moines that I need to pay a visit to...maybe I could get a couple sets of piping and ICs and sell them.
|
Glad to see the IC arrived to you undamaged ILUV. Did you get rid of the 1320, lol? I told ya it was in good shape. Let me know how the rest of your IC project goes...
|
I won a starion off ebay a little while ago but haven't gotten it yet. I'll be going in next month or so. I'm going to pick up a few dynomax U bends. I think 2.25". like $15 each. not sure how many I'll need. cut them to meet together and mark then. then get a shop to weld them together for a few dollars. then just use silicone connecters at the IC ends, turbo, and TB.
|
Originally Posted by Rotaryman88' date='Aug 1 2002, 05:36 PM
Glad to see the IC arrived to you undamaged ILUV. Did you get rid of the 1320, lol? I told ya it was in good shape. Let me know how the rest of your IC project goes...
You can just use only old pipes. The HKS pipes are just cast aluminum. So you can probably get the same types of pipes cheaper. |
it may look easy but its a pain..... i'm just gonna let a shop do all the piping!
|
Originally Posted by vosko' date='Aug 1 2002, 10:24 PM
it may look easy but its a pain..... i'm just gonna let a shop do all the piping!
I'm not looking forward to figuring out the plumbing. https://www.nopistons.com/forums/pub...>/rolleyes.gif It doesn't help that I live in an apartment. |
one the tuner shops around here does intercooler piping and i know someone else that can do them for me https://www.nopistons.com/forums/pub...IR#>/smile.png
|
Ok so you can use a intercooler from a Starion.
What is this IC like compared to say the Greddy models made for our car. The reason why I am going to a FMIC is that I will be boosting alot higher than stock in the future. What will this IC be able to handle? |
Originally Posted by ILUVMY88CABRIO' date='Aug 2 2002, 06:59 AM
[quote name='vosko' date='Aug 1 2002, 10:24 PM']it may look easy but its a pain..... i'm just gonna let a shop do all the piping!
I'm not looking forward to figuring out the plumbing. https://www.nopistons.com/forums/pub...>/rolleyes.gif It doesn't help that I live in an apartment.[/quote] Be prepared to take a sawzall and/or roto-zip to your radiator supports. <_< |
Originally Posted by natas' date='Aug 2 2002, 09:46 AM
Ok so you can use a intercooler from a Starion.
What is this IC like compared to say the Greddy models made for our car. The reason why I am going to a FMIC is that I will be boosting alot higher than stock in the future. What will this IC be able to handle? |
I think you can safely run 15 - 20 psi on them. But I'm sure the Greddy IC would be more efficient at 15+ psi.
|
how much does one of those starion ic run ya at a junkyard or whatever?
|
i can hook you guys up with HPI intercoolers (3 core)if your interested
check out www.jouleusa.com starting at 620 with side tanks buy more than 1 i can knock the price down even more http://www.hpi.co.jp/data/intercooler1.jpg S TYPE@1 3.8‚‹‚‡ 600mm x 270mm x 70mm S TYPE@2 3.0‚‹‚‡ 500mm x 270mm x 70mm |
not a bad price at all https://www.nopistons.com/forums/pub...IR#>/smile.png
|
group buy fmic?? i would go in on that if i had something to intercool
|
1 Attachment(s)
here is my install of the 3 core HPI intercooler
|
1 Attachment(s)
another
|
1 Attachment(s)
fully installed
|
looks slightly nicer than my ghetto intercooler which i still need piping for https://www.nopistons.com/forums/pub...DIR#>/wink.png
|
All times are GMT -5. The time now is 01:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands