NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   An fittings (https://www.nopistons.com/2nd-generation-specific-17/fittings-7006/)

1Revvin7 10-24-2002 08:55 PM
I finally decided to go with AN fitting and the aeromotive FPR, im also getting the socketless fittings and hose. Now this **** is spendy. I need to know how many 90 or 45degree angles i will need. I dont' want to order extra or whatever, so if you could tell me your setup and which ones u used that would be great!

banzaitoyota 10-25-2002 06:55 AM
Go to www.FC3S-PRO.com

1Revvin7 10-25-2002 07:10 AM
Originally Posted by banzaitoyota' date='Oct 25 2002, 06:55 AM
been there done that, they don't mentions anything about angles since their diagram has the fuel rails off the car.

banzaitoyota 10-25-2002 07:31 AM
Minimize the use of 90^ fittings, each one causes a pressure drop. It is better to do large radius bends with the hose. I haven''t started laying out my set-up yet or I would give you an accurate answer

1Revvin7 10-25-2002 07:58 AM
Originally Posted by banzaitoyota' date='Oct 25 2002, 07:31 AM
Minimize the use of 90^ fittings, each one causes a pressure drop. It is better to do large radius bends with the hose. I haven''t started laying out my set-up yet or I would give you an accurate answer
i didn't know that, i just ordered 3 90degrees and 8 straight. I atleast have to use 90degrees on the secondary and primary feed lines. Thats how i have seen everyone setup their fuel systems.

banzaitoyota 10-25-2002 08:56 AM
Minimize the use of them

13BAce 10-25-2002 03:04 PM
Originally Posted by 1Revvin7' date='Oct 25 2002, 05:58 AM
[quote name='banzaitoyota' date='Oct 25 2002, 07:31 AM']Minimize the use of 90^ fittings, each one causes a pressure drop. It is better to do large radius bends with the hose. I haven''t started laying out my set-up yet or I would give you an accurate answer
i didn't know that, i just ordered 3 90degrees and 8 straight. I atleast have to use 90degrees on the secondary and primary feed lines. Thats how i have seen everyone setup their fuel systems.[/quote]

You get whatever fits your setup. Everyone's is different.

1Revvin7 10-25-2002 03:54 PM
Originally Posted by 13BAce' date='Oct 25 2002, 03:04 PM
[quote name='1Revvin7' date='Oct 25 2002, 05:58 AM'][quote name='banzaitoyota' date='Oct 25 2002, 07:31 AM']Minimize the use of 90^ fittings, each one causes a pressure drop. It is better to do large radius bends with the hose. I haven''t started laying out my set-up yet or I would give you an accurate answer
i didn't know that, i just ordered 3 90degrees and 8 straight. I atleast have to use 90degrees on the secondary and primary feed lines. Thats how i have seen everyone setup their fuel systems.[/quote]

You get whatever fits your setup. Everyone's is different.[/quote]

yeah i know i was just trying to see what other ppl did.


All times are GMT -5. The time now is 11:49 AM.


© 2024 MH Sub I, LLC dba Internet Brands