ok installed engine today POPS happened to come outside while i am putting my shiny new RB oil cooler lines. he told me put them on really tight. well i did i cracked the front cover where it goes . YAY YAY YAY. this means i know get to jack up the engine remove the oil pan, remove OMP, remove front eshaft bolt, pop off broken front cover. order new gasket, install front cover my old engine, install main eshaft pulley and nut, reinstall OMP, install oil pan. so much fun. as you can tell i'm very pissed right now. this sets me back atleast a WHOLE day getting the car running...... :(
|
HAHAHAH that sux
|
|
That sucks!
|
i'm gonna try and fix it tomorrow. we'll see what happens. i need a 19mm 1/2" drive to try and break the eshaft nut loose
|
boy at work cracked his 12a the same-pulled off had welded for spare. https://www.nopistons.com/forums/pub...#>/BURNOUT.gif
|
Originally Posted by horn4858' date='Jun 29 2002, 06:36 PM
boy at work cracked his 12a the same-pulled off had welded for spare. https://www.nopistons.com/forums/pub...#>/BURNOUT.gif
|
yea it pays to have some spare parts still a bitch changing it in car :o
|
Originally Posted by horn4858' date='Jun 29 2002, 06:51 PM
yea it pays to have some spare parts still a bitch changing it in car :o
|
That's the first time I ever heard of that happening. Are you sure that you can handle the FPR? https://www.nopistons.com/forums/pub...>/rolleyes.gif
|
Originally Posted by 13BAce' date='Jun 29 2002, 07:02 PM
That's the first time I ever heard of that happening. Are you sure that you can handle the FPR? https://www.nopistons.com/forums/pub...>/rolleyes.gif
|
ahhh yes, that was the perfect way to end a long, lot, sweaty, dirty day....
"hey Jay, we have a problem" yeah, life is good. Well atleast we got the motor in, and my custom radiator mount is working. Whatever your dad did to fix it I hope you atleast used the copper washer, I heard him saying to leave it out, but you can't! :( Anoher fun day to add to the Vosko files! |
Originally Posted by turbovr6' date='Jun 29 2002, 09:16 PM
ahhh yes, that was the perfect way to end a long, lot, sweaty, dirty day....
"hey Jay, we have a problem" yeah, life is good. Well atleast we got the motor in, and my custom radiator mount is working. Whatever your dad did to fix it I hope you atleast used the copper washer, I heard him saying to leave it out, but you can't! :( Anoher fun day to add to the Vosko files! |
i just remembered something. we never took off the lock bolts on the front eshaft OOPS!
|
Originally Posted by vosko' date='Jun 29 2002, 09:03 PM
[quote name='13BAce' date='Jun 29 2002, 07:02 PM']That's the first time I ever heard of that happening. Are you sure that you can handle the FPR? https://www.nopistons.com/forums/pub...>/rolleyes.gif
I always like to keep copper washers and teflon tape handy. You may have noticed that I have quite a few spare copper washers. https://www.nopistons.com/forums/pub...DIR#>/wink.png |
Originally Posted by 13BAce' date='Jun 29 2002, 09:57 PM
[quote name='vosko' date='Jun 29 2002, 09:03 PM'][quote name='13BAce' date='Jun 29 2002, 07:02 PM']That's the first time I ever heard of that happening. Are you sure that you can handle the FPR? https://www.nopistons.com/forums/pub...>/rolleyes.gif
I always like to keep copper washers and teflon tape handy. You may have noticed that I have quite a few spare copper washers. https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote] yeah. tomorrow is d-day. that front cover is going down ! |
Whenever you need to be cheered up, just read a thread by Vosko.
|
Well that blows the big one my man. But **** happens, and mostly when you least expect it. I think I used a 3/4 deep socket on the front bolt, since I had one lying around. Don't feel bad, I broke off a piece of my brake line tubing on my Jeep and had to buy a double flaring tool and remount the stanking thing. It worked out good, and now I am pretty good at making a double flare.
|
Originally Posted by vosko' date='Jun 30 2002, 12:05 AM
[quote name='13BAce' date='Jun 29 2002, 09:57 PM'][quote name='vosko' date='Jun 29 2002, 09:03 PM'][quote name='13BAce' date='Jun 29 2002, 07:02 PM']That's the first time I ever heard of that happening. Are you sure that you can handle the FPR? https://www.nopistons.com/forums/pub...>/rolleyes.gif
I always like to keep copper washers and teflon tape handy. You may have noticed that I have quite a few spare copper washers. https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote] yeah. tomorrow is d-day. that front cover is going down ![/quote] Be careful this time. https://www.nopistons.com/forums/pub...DIR#>/wink.png |
Originally Posted by TonyTurboII' date='Jun 30 2002, 12:42 AM
Whenever you need to be cheered up, just read a thread by Vosko.
|
Originally Posted by 13BAce' date='Jun 30 2002, 09:09 AM
[quote name='vosko' date='Jun 30 2002, 12:05 AM'][quote name='13BAce' date='Jun 29 2002, 09:57 PM'][quote name='vosko' date='Jun 29 2002, 09:03 PM'][quote name='13BAce' date='Jun 29 2002, 07:02 PM']That's the first time I ever heard of that happening. Are you sure that you can handle the FPR? https://www.nopistons.com/forums/pub...>/rolleyes.gif
I always like to keep copper washers and teflon tape handy. You may have noticed that I have quite a few spare copper washers. https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote] yeah. tomorrow is d-day. that front cover is going down ![/quote] Be careful this time. https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote] yeah, i learned my lesson, don't have any more spare housings :bigok: |
Vosko you're shattering my illusions about you.
|
Originally Posted by Rotarydragon' date='Jun 30 2002, 10:01 AM
Vosko you're shattering my illusions about you.
|
Originally Posted by vosko' date='Jun 30 2002, 05:08 PM
[quote name='Rotarydragon' date='Jun 30 2002, 10:01 AM']Vosko you're shattering my illusions about you.
Yeah I was here thinking that everything Vosko did worked perfectly and he was an RX-7 god, then find out he broke something!? What hope do mere mortals like me have? |
Originally Posted by Rotarydragon' date='Jun 30 2002, 11:39 AM
[quote name='vosko' date='Jun 30 2002, 05:08 PM'][quote name='Rotarydragon' date='Jun 30 2002, 10:01 AM']Vosko you're shattering my illusions about you.
Yeah I was here thinking that everything Vosko did worked perfectly and he was an RX-7 god, then find out he broke something!? What hope do mere mortals like me have?[/quote] nobody's perfect. i learned that a long time ago. including me https://www.nopistons.com/forums/pub...IR#>/smile.png |
I'd replace the cover or you will always be wondering if the weld held.
Don't forget to address that O-Ring Mazda O-Ring Problem 86-92 |
turborotor showed me that link
|
All times are GMT -5. The time now is 01:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands