Finalizing Parts For Auto --> Manual
#1
Well i just wanted to know any other things i should consider changing while im doing the transmission swap
I went to the Mazdatrix website and wanted to get the specialty tool that holds the flywheel why you try to take off the flywheel nut. And then i started looking at Y Blocks, Bellhousing Bolts, and Front and Rear Transmission seals. I would rather be overprepared than underprepared when i start doing the swap. I dont want to have to wait for parts becuase i didnt take into consideration the other stuff.
So far i have:
Clutch (pressure plate, disc)
Throw Out bearing
Pilot Bearing
Pilot Seal
Clutch Alignment Tool
Gear Oil
SS Clutch Line
New Slave Cylinder
New Master Cylinder
Want:
Tool for flywheel
New Bell Housing Bolts
Y Blocks
Front and Rear Transmission Seals
What else?
You tell me, please.
Jason
I went to the Mazdatrix website and wanted to get the specialty tool that holds the flywheel why you try to take off the flywheel nut. And then i started looking at Y Blocks, Bellhousing Bolts, and Front and Rear Transmission seals. I would rather be overprepared than underprepared when i start doing the swap. I dont want to have to wait for parts becuase i didnt take into consideration the other stuff.
So far i have:
Clutch (pressure plate, disc)
Throw Out bearing
Pilot Bearing
Pilot Seal
Clutch Alignment Tool
Gear Oil
SS Clutch Line
New Slave Cylinder
New Master Cylinder
Want:
Tool for flywheel
New Bell Housing Bolts
Y Blocks
Front and Rear Transmission Seals
What else?
You tell me, please.
Jason
#5
[quote name='banzaitoyota' date='May 31 2005, 08:45 AM']Refresh my memory, you are planning on welding in a set of mount ears factory style?
[/quote]
I have no idea what ure talking about.
IM talking about anything that i should take into consideration while im doing this swap. parts perhaps or methods of installation or product replacement lol
[snapback]719319[/snapback]
[/quote]
I have no idea what ure talking about.
IM talking about anything that i should take into consideration while im doing this swap. parts perhaps or methods of installation or product replacement lol
#7
[quote name='banzaitoyota' date='May 31 2005, 09:02 AM']YOU need to do ALOT more research. the automatic tranny mounts are located on the car further back than the manual cars were.
[/quote]
yeah i was reading about that . Rotary Ressurection has a write up of making your own bracket made out of a C channel with two wholes so you can connect the new to old position. And talk about the welding to make sure it doesnt move around during shifting..
Anything else i should get like the bell bolts, front and rear seals?
[snapback]719326[/snapback]
[/quote]
yeah i was reading about that . Rotary Ressurection has a write up of making your own bracket made out of a C channel with two wholes so you can connect the new to old position. And talk about the welding to make sure it doesnt move around during shifting..
Anything else i should get like the bell bolts, front and rear seals?
#10
[quote name='nopistons94' date='May 31 2005, 10:12 AM']ill come up and attempt to help you if you give me
1.beer
2.food
3.girls
4.taco bell (im serious on this one)
[/quote]
good , i appreciate it. But thats a GIVEN
1.beer
2.food
3.girls
4.taco bell (im serious on this one)
[snapback]719357[/snapback]
[/quote]
good , i appreciate it. But thats a GIVEN