NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Efi, Depressurizing Fuel. (https://www.nopistons.com/2nd-generation-specific-17/efi-depressurizing-fuel-41208/)

rowtareh 06-28-2004 05:42 PM

I don't see where the fuel lines come up to the block on my S4 N/A. I see a/c lines, and the brake lines, but no fuel lines. Are they going to come up under the firewall? Or through the firewall itself?



And depressurizing the fuel system. Says in Haynes Manual to start up car, but ovbiously I can not start mine up. Just undo the gask tank filler cap? Or should I be doing something else?



Everything is almost unhooked. One oil cooler line, two lower rad hoses, the wiring harness. And then the tranny which will be the last thing, and the exhaust. Think I will get under 'er today and do the exhaust today.



Wish me luck.

Rob x-7 06-28-2004 05:56 PM


Originally Posted by RowTarEh?' date='Jun 28 2004, 06:42 PM
Think I will get under 'er today and do the exhaust today.



Wish me luck.

the day is almost over



push the valve in on the fuel line on top of the motor to release some pressure

it looks like a tire valve

rowtareh 06-28-2004 07:18 PM

Ok, I see it now. The exhaust is being a pain. I have one hanger left, and I realized I should've taken all the hangers off first, and supported them, then unbolted the exhaust. D'oh!



Almost done! Took me about a week to get off my ass and get it all done.


All times are GMT -5. The time now is 12:22 AM.


© 2024 MH Sub I, LLC dba Internet Brands