Well I got my quote back from the driveshaft shop down in NC for my aluminium driveshaft I wanted built to handle high RPMs, decent torque and good power..while saving weight. The guys are good to deal with and seem to know what they are talking about! I know the stock driveshaft will probably put up with my abuse, but I'm building the car all around with new parts, so I didn't want to throw a used driveshaft in w/ unknown mileage, blah blah.. so anyways... now that I got that quote I'm looking into some safety things I'd like to have as well.



I'm looking at the competition engineering driveshaft loop that is basically universal and is around $40 from summit. No biggie on that...my problem is trying to find a scatter shield for the 13B bellhousing, or even an SFI certified replacement bellhousing.



Anybody running any of this equipment or know a good place to call to have it made up? I'm around a lot of domestic drag cars, but the guys who run those shops don't have much to help a "little weedwacker" like me,lol.... any help is appreciated.



Oh, BTW..don't start this thread off about I don't need this or why would you want that...only helpful answers, PLEASE guys..i know what I want..just don't know where to find it!

Why can't the drag guys help out? A propshaft is a propshaft. Anyway IMO 1 or 2 hoops of 6mm flat should see you, I've seen the damage done by a loose prop in a car like mine, and the prop hadn't even penetrated 2mm aluminium sheet. The last thing I want to do is discourage safety measures, but from the time it fails to the time you bring the car to a halt wondering what that huge racket is, I doubt it'll do that much damage.



I would have thought that well secured loops fixed as close to the prop itself to limit the "flailing about" radius as much as possible would be your best bet, but i'm not basing it on any experience etc.



Mark

The drag guys can help with the shaft loops, that's really not a bid deal, i figured I'd mention it incase anybody had experience w/ other brands,etc.



My main thing is the scatter shield...I can't find any for the rx7s..

Yeah, propshafts don't scare me nearly as much as flywheels.



Mark

Have you looked into the ballistic blankets? Would seem to be a universal solution.

Ballistic blankets would probably work, but I don't believe many tracks will accept that as a compliant to their rules. Australia still allows them, but NHRA, IDRA, IHRA I believe all require some form of SFI approved shield or bellhousing.



Like I said, I don't plan on professionally competing this car in drag racing, so I'm not concerned...but if drift sanctioning bodies start requiring a shield...I'm screwed,lol. I might do the blanket for now, just for my peace of mind,lol. I have had a hard time finding those as well though..I found one on an aussie site for like $300... I'll keep looking.

Summit sells an RCI blanket for $80. It's SFI 4.1 rated. Only negative I've heard of them is that they can soak up fluids and get nasty over time.



Just found this place that someone on the other board linked. No idea what their products are like but it's worth a look.



http://www.theracingstore.com/drv_scatter_shields.html

Thanks man...i'll take a look at them..i'm out of town for a week, but i really want to get my car back to the garage and get my powertrain back in it, lol...



I know the other concern w/ the blankets is the ability to catch fire after soaking fluids, etc... lots of research to be done, lol... thanks again.

I actually just noticed that place is down in Tampa florida...I'm going to be in Florida for the next 5 days, if I can get time free...I might drive over there and see whats up..

id reccommend 2 driveshaft loops, most people only run one, but for absolute saftey id say run one by each ujoint, that way whichever one lets go you minimize damage.



as for the trans scatter shield, like C. Ludwig said, id start with the RCI Blanket, it's SFI rated so you should be able to get past the rules, and as long as you're not leaking fluids you should be fine.



I mean...if youre leaking flammable fluids i think youd have bigger problems then just the blanket catching fire, ya know?



but yea, thats my exact planned setup lol.



kevin.

yea, i think i'm justing going the loop/blanket combo for now...

im a summit fiend, they seriously have everything, their catalog is huge, yet theres nothing in it compared to their physical inventory. you can call them and once you get a live operator you give them a vague description of what you ned and theyll bring up four exact things you need.



its awesome....if onjly they carried more rotary dedicated things. but hey, whatev.



kevin.

Yea, i have a lot of family in ohio...my uncle (big muscle car guy) lives just 15 minutes from their main distribution center/store in summit county ohio...it's AWESOME. If you ever get a chance, round some buddies up and drag them there..it's worth the trip! It's nice for my uncle too, because he never waits on parts...just runs down to the "parts store" but instead of an advance auto or napa that I have ..he has summit racing,lol..

lol, theyre close enough to me that i normally get ground shipped items the next day.



kevin.