Don't Think Im Geting Any Spark
09-08-2005, 06:33 PM
#12
Member
Thread Starter
Join Date: Jul 2005
Posts: 57
yea i got all new fuzes in the engine bay 2 how can i check if im geting any spark and wuts the oder for the wires like t2 t1 l2 l1 were do they go mine are like t2 is top back t1 is top front and l2 is bottom back and l1 is bottom front
09-08-2005, 09:30 PM
#13
Senior Member
Join Date: Jul 2002
Location: Portland, OR
Posts: 2,467
[quote name='mail-man' date='Sep 8 2005, 04:33 PM']yea i got all new fuzes in the engine bay 2 how can i check if im geting any spark and wuts the oder for the wires like t2 t1 l2 l1 were do they go mine are like t2 is top back t1 is top front and l2 is bottom back and l1 is bottom front
[/quote]
That is correct, trailing on top leading on bottom.
[snapback]756517[/snapback]
[/quote]
That is correct, trailing on top leading on bottom.
09-08-2005, 10:39 PM
#15
Senior Member
Join Date: Jul 2002
Location: Portland, OR
Posts: 2,467
use an ohmmeter and check the resistance of the coil(s), over 1 ohm means the coil is bad and needs replaced
Assuming the coils are in good condition you should next check the ignitors. Unless you have an igniter checker you will have to do it the old-fashioned way which can get you shocked, the following is at your own risk.
Hold the plug with an insulated tool and keep it close to a grounded out source in the e-bay while someone bumps the key for you, do one plug at a time and, if the car should turn over and run, shut it down immediately.
Assuming the coils are in good condition you should next check the ignitors. Unless you have an igniter checker you will have to do it the old-fashioned way which can get you shocked, the following is at your own risk.
Hold the plug with an insulated tool and keep it close to a grounded out source in the e-bay while someone bumps the key for you, do one plug at a time and, if the car should turn over and run, shut it down immediately.
09-09-2005, 08:58 PM
#16
Member
Thread Starter
Join Date: Jul 2005
Posts: 57
ok guy i got to start but now it cuts off i dont think im geting gas to the motor i have to us starter fliud to keep it alive and so i think its the injectors are there a speical order from them like primery or secondery i dont know need help
09-10-2005, 08:09 AM
#17
Senior Member
Join Date: May 2002
Location: Richardson Texas
Posts: 4,326
i wouldnt start with the injectors those are the most expensive thing to replace. you can test the resistance on the injectors before getting new ones to see if theyre bad.
if theres no fuel id start at the back and work your way forward, that means fuel pump, then filter, then pressure regulator, then maybe pulsation damper, then injectors.
does your car have a gas cap on it?
if theres no fuel id start at the back and work your way forward, that means fuel pump, then filter, then pressure regulator, then maybe pulsation damper, then injectors.
does your car have a gas cap on it?
