NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   difference between gauges (https://www.nopistons.com/2nd-generation-specific-17/difference-between-gauges-64481/)

jdm12a 02-28-2007 05:27 PM

what are the differences between gauge clusters and gauges? is it jus that the t2 has a boost gauge and the n/a doesnt? is that the only diff? thanks

j9fd3s 02-28-2007 06:06 PM

na has a voltmeter instead of the boost guage.



i think the turbo speedo goes to more mph too, but i'm just guessing

jdm12a 02-28-2007 06:15 PM

so if i needed a gauge set for a 10ae the n/a would work fine as long as i had a seperate boost gauge on the a pillar or somthing?

toplessFC3Sman 03-01-2007 12:59 AM

The difference in speedo readings mean that for the same car, tranny, speedo cable etc, an NA speedo will read less than a turbo, or would they read the same? In the same vein, would a turbo tranny with an NA speedo cable and speedo read the correct speed?

j9fd3s 03-01-2007 11:19 AM


Originally Posted by toplessFC3Sman' post='861628' date='Feb 28 2007, 10:59 PM

The difference in speedo readings mean that for the same car, tranny, speedo cable etc, an NA speedo will read less than a turbo, or would they read the same? In the same vein, would a turbo tranny with an NA speedo cable and speedo read the correct speed?



i think the turbo just goes to a higher mph

jdm12a 03-01-2007 11:33 AM

if i put the gauge cluster from my n/a will it plug directly into an s4 t2 dash harness? and will my voltometer act as the stock boost gauge then lol, but still say volt?

T2 vert 03-02-2007 07:28 AM


Originally Posted by jdm12a' post='861672' date='Mar 1 2007, 09:33 AM

if i put the gauge cluster from my n/a will it plug directly into an s4 t2 dash harness? and will my voltometer act as the stock boost gauge then lol, but still say volt?





You can use a s4 NA gauge cluster in a s4 turbo car. It will plug in and the volts will work as volts. The s5 will not plug in, they are different.

TweakGames 03-02-2007 10:49 AM


Originally Posted by T2 vert' post='861781' date='Mar 2 2007, 05:28 AM

You can use a s4 NA gauge cluster in a s4 turbo car. It will plug in and the volts will work as volts. The s5 will not plug in, they are different.



What about going the other way? Anything special needing to be done to go from stock NA cluster to t2 cluster? (they are both s4)

jdm12a 03-02-2007 07:16 PM

will the speedo still be correct or will it be a lil off because its 160 to 150?

jdm12a 03-04-2007 06:34 PM

?

?


All times are GMT -5. The time now is 10:51 PM.


© 2024 MH Sub I, LLC dba Internet Brands