NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Damnit.. (https://www.nopistons.com/2nd-generation-specific-17/damnit-11535/)

75 Repu 01-31-2003 11:43 AM

Alright, This week I found out a buddy of mine has a friend with a salvage yard.. That means he can hook me up with parts for my engine.. I was looking through the stuff I got with the engine I bought and I have the UIM LIM both fuel rails, ACV(don't need it..) No rats nest.. Lots of other little crap.. The throttle body and stuff is all still there..I guess I almost have everything..



Since I might be able to purchase the parts for my engine alot easier, I am considering ditching the Carb again.. but I need to get fuel injectors, oil metering system, and stuff like that..

What things do I need to make this engine run..? Then I could drive the truck for a couple of months till I get the $$ for an E11..

banzaitoyota 01-31-2003 11:45 AM

Don't need no stinking omp!!!. Go look at my wiring thread and install all the UN-highlighted components! John

j9fd3s 01-31-2003 11:48 AM

yeah, get the 86-88 mechanical one. the 89+ tbody has a spacer in place of the metering pump arm, so you can make it like factory



mike

75 Repu 01-31-2003 11:48 AM

ok, but what about the fuel cut thing.. Do just use one of the fuel cut defenders.., Thats how the guy I bought the engine from blew it in the first place..

75 Repu 01-31-2003 11:49 AM

can I get the 86-88 one from an N/a or does it have to be a T2..?

j9fd3s 01-31-2003 11:49 AM

yah, get a fuel cut thing and dont go over 10-12psi on the stock injectors/ecu



mike

vosko 01-31-2003 11:53 AM

keep it at 10psi or lower and you will be golden as far as not blowing up goes :bigthumg:

75 Repu 01-31-2003 11:55 AM

ok.

75 Repu 01-31-2003 12:01 PM

If I go with bigger injectors will I have to get different fuel rails?

banzaitoyota 01-31-2003 12:10 PM

NOT IF YOU DON'T EXCEED 720CC

75 Repu 01-31-2003 12:14 PM

THANK YOU!!

banzaitoyota 01-31-2003 12:46 PM

:bigok: Guys, If I come on here in all caps , its because I am taking a quik break from work and forgot to turn caps lock off! https://www.nopistons.com/forums/pub...IR#>/smile.png

Turbo II 01-31-2003 12:53 PM

hook me up on the location of this yard

j9fd3s 01-31-2003 12:59 PM


Originally Posted by banzaitoyota' date='Jan 31 2003, 10:46 AM
:bigok: Guys, If I come on here in all caps , its because I am taking a quik break from work and forgot to turn caps lock off! https://www.nopistons.com/forums/pub...IR#>/smile.png

gotcha, i used to have that prollem too



mike

75 Repu 01-31-2003 01:02 PM

My Friend lives in fontana, so it is out there, but if his buddy can get me the stuff I would make the drive... Do you need anything in particular?

Turbo II 01-31-2003 01:03 PM

fontana aint that far out. i will be needing some stuff for my fb when i get it

75 Repu 01-31-2003 01:15 PM

Man, FB's are common as hell in the junk yards.. Got to the ones in the valley.. Like the one by Glenoaks, where they street race, and the other one on roscoe(or tuxford)..


All times are GMT -5. The time now is 03:03 PM.


© 2024 MH Sub I, LLC dba Internet Brands