NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Coolent Leak from Oilpan? (https://www.nopistons.com/2nd-generation-specific-17/coolent-leak-oilpan-65028/)

EastonBall 03-31-2007 02:05 PM

So, after noticing a leak under my car... it appears that coolent is leaking from the oil pan. I know how crazy this sounds. When I try to start the car it also blows white smoke... So, this means that i've got some bad seals in the motor right? It won't start... And what do I need to fix the problem. I mean..I know it needs a rebuild, but what needs to be replaced when I do a rebuild to fix this problem?

j9fd3s 03-31-2007 05:17 PM

coolant is leaking down from somewhere, and like dripping around the pan. maybe waterpump?

EastonBall 03-31-2007 07:53 PM


Originally Posted by j9fd3s' post='866085' date='Mar 31 2007, 02:17 PM

coolant is leaking down from somewhere, and like dripping around the pan. maybe waterpump?







I thought that also.. but it is def coming from in the oil Pan. No leaks anywhere. ALso... this is leaking at the back of the motor. It only leaks when I try and start the car also...

Baldy 04-02-2007 07:46 AM

If it were leaking from inside the oil pan, wouldn't it be leaking a bunch of oil too?

rx7b13 04-02-2007 05:07 PM

if its leaking from the rear then the rear main seal is bad and you need to replace it. also if you blow out white smoke and it smells kinda sweet then you also have blown coolant seal. in my opnion i think your due for a rebuild

GreyGT-C 04-02-2007 05:15 PM

i think a bad rear main seal is the least of his problem. Do an oil change and see what the oil looks like. Also, there are coolant lines that run to the top of the rear engine housing, have a look at them while you are at it.



Since you are asking what to replace, i assume that you have never rebuilt one yourself. You might wanna call around and find a shop to do it for you... *ahem* a rotary shop... not just any engine shop. You might even wanna look around for a used one as a direct swap in. Rebuilds can be quite expensive depending on what your housings look like.


All times are GMT -5. The time now is 12:19 AM.


© 2024 MH Sub I, LLC dba Internet Brands