Im putting my motor together after donig a swap from an 88 SE to an 86 Sport. Now that im putting my motor back together I was looking at the connectors and I noticed that a couple of them have the plastic around them broken. Broken to the point that they will rattel off. The injector ones. the one that goes to the thermostat housing. and a couple more. What can I do to keep them on?



One more question any of you guys dealt with missing screws? Im missing the thormostat housing screws, and I belive a starter bolt(I put a wronge one in there) and I broke off one of the studs on the 6th port actuators. I really need some help I took the motor so much apart to take it out that I dont remeber how to put it back together.

Thats why i have a big box full of screws.... Get some new connectors..

i do have a box full uf screws but the borowers have gone thourgh it once or twice. What can i do about that little plastic that goes on the primary fuel rail between the rail and the engine? i lost that to https://www.nopistons.com/forums/pub...1047683358.gif

i had the same problems with some of my connectors...so i went to the junk yard and found some connectors in a fc in a better condition. cut it and soldered it on mine...works great.

Well I do have my parts car I can get them from. But i have no idea where the screws are. Would any one be willing to go to the junkyard start taking out screws and put them in ziplock bags labled? I would be willing to pay like $75 for the screws labled in bags right now. I am so pissed that I cant find any damn screws anywhere and im so sad that I cant put it back together. Do any of you live near a JY that has N/A rx'7s that could do this for me? it is an easy $75 just take out the screws lable where they came from in ziplock bags. I know that is what I should have done but I rushed to do the swap.

HAHA, got to a dealer and buy those parts for way less than that! So you play starcraft?

Im in SCAA(Star Craft Addicts Anonymous) https://www.nopistons.com/forums/pub...1047683785.gif https://www.nopistons.com/forums/pub...1047683785.gif

you telling me I can go to the dealre and ask for individual bolts and ****? I stuck a wrong bolt into the lower hole of the starter and i had to it it hadr for the bolt to go all the way down. and im pissed I spend more time looking for bolts than actually putting them on.

Buy new Injector Connectors and Clips at Autozone