The water pump is new and so is the thermometer, i did the gusher test and my coolant seals are good, what should I check now?!? please help
|
Do you still have a belly pan? Does it overheat while driving?
|
Check or replace as necessary.
Fan clucth Radiator New Mazda OEM thermostat If all that is good then ??? got me I took a part a good motor cause the radiator was cloged so and I thought it was blown https://www.nopistons.com/forums/pub...1047683358.gif .... . . . . . .my $.02 |
hmm did you get all the air out of the cooling system?
|
if u checked everythign its proly teh fan, gran it and try to spin it fast if it stops right after then its fine, i just replaced mine with an electricone, i actaulyl felt a diffrence on teh top end, ass dyno sais 2 hp https://www.nopistons.com/forums/pub...IR#>/smile.png
|
how long did you overheat for? you know you could of fucked you engine by overheating it right? https://www.nopistons.com/forums/pub...DIR#>/ohmy.png
|
How do you know the water seals are good?...I've never heard of the gusher test. I would check the t-stat...and get the radiator cleaned...it could be clogged
|
I would flush the rad (thus changing the coolant in the whole system), and make SURE you have a mazda OEM thermostat..
|
Originally Posted by ColinRX7' date='Feb 4 2004, 10:28 AM
I would flush the rad (thus changing the coolant in the whole system), and make SURE you have a mazda OEM thermostat..
Yeah, what is the gusher test? |
Originally Posted by Redwood' date='Feb 4 2004, 08:33 PM
Of course, it takes more than a radiator flush to clean the entire system as this will not do anything for the water in the engine.
Yeah, what is the gusher test? |
Originally Posted by 1Revvin7' date='Feb 4 2004, 05:43 PM
Just use the coolant drain plug on the engine https://www.nopistons.com/forums/pub...DIR#>/wink.png
|
Originally Posted by Redwood' date='Feb 4 2004, 05:33 PM
Of course, it takes more than a radiator flush to clean the entire system as this will not do anything for the water in the engine.
Yeah, what is the gusher test? |
Originally Posted by jdeez42' date='Feb 3 2004, 04:34 PM
The water pump is new and so is the thermometer, i did the gusher test and my coolant seals are good, what should I check now?!? please help
|
Oh yea, one other commonly overlooked thing is the radiator cap. Could be old and need to go to a higher pressure one. I just wanted to throw that out there, but really doesn't sound like that would; be causing the problem, but you never know.
|
All times are GMT -5. The time now is 06:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands