NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Cant Rev Past 6100 Rpms (https://www.nopistons.com/2nd-generation-specific-17/cant-rev-past-6100-rpms-16114/)

mockujin 04-22-2003 02:23 PM

I just bought a 89 GTU, and it wont rev past 6100 rpms, and it missfires at idle and lops a lil, would that be from bad sparkplugs?

TYSON 04-22-2003 02:53 PM

Look under the hood. Maybe somebody snuck a five-oh in there without telling you. https://www.nopistons.com/forums/pub...1047683785.gif



Sparkplugs and wires are a possible easy fix and you should do it anyway, seriously though. https://www.nopistons.com/forums/pub...IR#>/smile.png

Rx7Roadster 04-22-2003 03:11 PM

Definetly change the plugs and wires. That should help out. Drive it again and let us know if that helped.

mockujin 04-22-2003 03:14 PM

ok, I will pick up the plugs, from a local kragen, man they charge 5.99 each for the plugs, is that normal?

Rx7Roadster 04-22-2003 03:18 PM

Yea thats about right. Rotaries use a different type of plug then a piston engine. You will know what I am talking about when you see them.

ROTARYROCKET7 04-22-2003 03:36 PM

https://www.nopistons.com/forums/pub...1047683329.gif yeah the NGK plugs are around $5.00-7.00 and the wireset should be less than $30.00. Remember to put anitsieze on the plugs and the boot protector grease. Do a tune up. Change the belts if they look crappy and other necesary items





Good lUck

rmaiersg 04-23-2003 12:48 AM

The only place around my area that had the right plugs available charged like $10 for mine! Pretty harsh.

UniqueTII 04-23-2003 03:50 AM

Your TPS could be at fault as well. Also, check the tube that goes from the air filter to the throttle body for cracks. It wouldn't hurt to change the fuel filter too.

mockujin 04-23-2003 11:31 AM

Ok, I got the plugs and wires, and that guy had four leading spark plugs, well anyway, it runs alot better but it still cant go past 6k,

ChainSawOnSteroids 04-23-2003 03:13 PM

my suggestion is compression test, although its not nice news but you should do that first off! and check for vac leaks, and fuel sys overview

let us know how it goes


All times are GMT -5. The time now is 08:38 AM.


© 2024 MH Sub I, LLC dba Internet Brands