my turning signals don't work.... everythinng is good but theres something im missing.... my hazzards lights work inside and out. but why not my turning signals... fuse is fine. no brake in wires.. .???? im stumped

humm, Maybe the switch it self is bad? Either that or the flashers. I think the hazard light flasher is seperate from the turn signal flashers. They just stopped working huh https://www.nopistons.com/forums/pub...1047683561.gif

Cold solder joint in the CPU board connector.

run a jumper wire from the turn signal fuse to another fuse. worked 4 me

[quote name='sureshot' date='Jul 5 2005, 09:31 AM']Cold solder joint in the CPU board connector.


[/quote]





I'm with sureshot





Check under the D/S kick panel for the CPU... Replace it with another one and it will work, but it's only a matter of time before that one craps out too, they are known for bad solder points.