Hello..... I have a 91 Turbo II and I recently replaced the fuel injectors with some new ones . After the install was complete and I put the Dynamic Chamber/Throttle body back on and reconnected everything , I started the car up and it won't hold an idle at all!!!! It does run though, as long as you are feathering the gas to keep RPM's up, but as soon as you let off it drops down and dies???? Also I have a really noticeable air leak sound coming from around the dynamic chamber and throttle body area, I sprayed soapy water all around the areas and noticed no bubbles or visual leaks ....Sorta sounds like air is trapped somewhere inside the chamber and throttle!!! Not sure though....If this sounds familiar to you please HELP!!!!!!! Advice is what I need as I have exhausted all my resources and by the way the check engine light does NOT come on and it is functional, I jumped the test connector and received no codes....Which according to the manual means VACUUM, FUEL, or INTERNAL PROBLEM!!!! Also I am not 100% sure I routed the vacuum lines on the back side of the chamber the right way, though I believe I put them in the same spot where they were when I started the job!!!! PLEASE SOMEBODY HELP ME FIX MY BABY!!!!
|
