90 idle problem with video
 

Hey guys. I bought this 7 in late january. Stock na motor. Previous owner removed all emissions including the bac valve. Car at one time had a tii motor in it. Not too sure if that might have something to do with it.

Heres the problem. It wont idle below 1k rpm. If it drops any lower, it just bounces between 400 and 800 rpm. If you give it gas, it'll raise back up to 1k but if you add any electrical load it'll drop again and just bounce or just die. The car also requires a little bit of throttle to start. Again, not sure if that has anything to do with it but.

I've added a bac valve that seems to test out ok but dont have another car to try it on. It doesnt seem to help.

The timing is also off. When under the timing light, the timing mark on the "crank" is under the waterpump. I've tried to adjust the cas but i cant get it to the pointer before i hit the edge of the adjustment. The car is also missing under idle which i believe is related to the timing.

Ive tried to do a compression check on it but im not too rotary savy. I "think" it tested out ok but not sure. The car runs great. Pulls all the way to redline, good torque, no smoke, etc.

Checked for vacuum leaks till i was blue in the face. I replaced uim to plenum and uim to lim gaskets, injector o-rings and seals, all lines for omp were replaced, and all new vacuum caps on all nipples. Ive gone through many a can of carb cleaner trying to find any more and nothing.

Adjusted the tps multiple times. Set it to 1vdc at the computer.

Crappy video:

http://youtu.be/A-sZwhtE32A

Ive been searching since i bought this car in january but I cant find any more info on this. Ive run out of things to check and need help. I want to love this car but its just been a pain so far.

Thanks
Michael