86 n/a build
 

my first rotary not much to look at but it's pretty solid for a $200 car that needed a starter/driveshaft

Re: 86 n/a build
 

Having a fuel pump problem whats the pump rewire consist of my pump will work out on 12v but wont kick on in the car and how to test the compression?

Re: 86 n/a build
 

Unplug the fuel pump/sending unit, turn the key on. At the plug the blue wire should be hot(12volts) and the black should be ground. The fuel pump relay is a shiny metal box on the drivers side inner fender just behind the trailing coilpack. I had to replace the fuelpump power wire on my 86 just after I got it. Make sure that the pump isnt stuck. If the car has been sitting for any length of time Im sure that the fuel left in the tank gummed up the pump, and its nearly impossible to clean it out. Just replace with walbro.

Re: 86 n/a build
 

ive pulled the pump and it pumps fine i think the wiring or relay is bad i going to run new wires if this doesnt work its going down the road...anyone interested in an 86xxx miles parts car that could run... pm me

Re: 86 n/a build
 

$250 for the whole car.. if you want it pm me and i can give you my number and directions where to pick it up