I was wodering what the differences between the 6 and 4 puck on ACT clutches are.
I like my clutches stiff but not overbearing, especially since it is an N/A. My new FC is an 87 N/A with many mods. (Soon to post some pics) I AM BACK! '=' |
Originally Posted by RevRex-7' date='Feb 14 2005, 10:43 PM
I was wodering what the differences between the 6 and 4 puck on ACT clutches are.
I like my clutches stiff but not overbearing, especially since it is an N/A. My new FC is an 87 N/A with many mods. (Soon to post some pics) I AM BACK! '=' It is my understanding that a 4 is going to be a lot more harsh and than the 6 which is a lot more harsh than a stock disk. You can get a lot of power into a stock disk with a HD pressure plate though and you'll only get about 30% more pedal stiffness. |
If you're n/a you should be able to just do a s/s man. I can't see you putting down enough power to warrant a 4or 6 puck clutch.
|
So what would you recommend?
'=' |
act street strip.
|
In virtually any application I'd say go with a street disk. I think something to factor in is that if you ever went for a turbo swap that the NA tranny is going to fall apart and you'd want to upgrade to a turbo tranny most likely. That being said, If you went with somone like ACT, I'd suggest a street disk and a HD pressure plate. On the NA 225mm clutch you can handle 268 ft*lb of torque which is probably well over anything you're going to have to worry about. The XT plates can handle up to 350 ft*lbs. I'd suggest looking at some reviews on them and see what people have to say about their kits. I know pineapple racing gets some nice full disks that hold up better to abuse too. The biggest thing to consider is that six pucks are a little bit cheaper and have a lot more grab. This is a double edged sword though. The other thing to worry about is the higher the force of the pressure plate, the more force it's going to take from your foot. I think the HD plates are on the order fo 30% more force and the XTs are something like 70%. It just becomes a pain in stop and go traffic. -Zach- |
find a shop that will resurface the disk you have now with kevlar.
|
Yes I was wondering about resurfacing the disc. That is a good idea.
Would this clutch be good? ACT Clutch I also have a question about the shifter. It is very loose and moves about freely when in neutral. Let’s say I were to get a short throw type shifter, would it come with the necessary accessories to remove the free play? If so what shifter would be the best buy? Thanks for your responses. '=' |
|
I've heard mixed things about centerforce and I've heard mixed things about ACT for that matter. I've heard a bit of good things about ACTs from friends and my brother used one and then went to a centerforce and I think had a few complaints. I really don't have any experience with them myself though. I'm fairly happy with ACT at the moment. |
All times are GMT -5. The time now is 04:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands