i hate dealing with people over the internet... thats why i try to buy stuff locally... but when it comes to nopistons i trust a lot of people on this board....
|
Originally Posted by rotor' date='Jan 25 2004, 09:56 PM
First of all you guys can ban me if you want but this is what happens when uo sell something to some stupid kid who doesn't know what he wants or what he's looking at. The motor in question came out of an 87TII it had a siezed up turbo so the guy went with a 91 turbo and manifold witch you guys all know is a better turbo. After that the emisions was removed and some block off plates were made out of mild steel they were kind of thick but did the trick. Then a few weeks later the throttle body mod was done the car ran sick and would still run if the wiring harness didn't short and burn. As far as the manifold being cut to fit If you think about it a four port manifold will not fit a six port no with out an adapter. The 5th and 6th ports would be partially left open causing a vacume leak and never run. what an idiot does this guy even know what he's looking at. Oh kick my ass bring it on m*&$#r f%$@er any time. You got a good 13b TII motor and now you want a little money back for your rebuild. Your just a little punk ass piece off **** from some red neck town that doesn't know your ass from a whole on the ground. If you want to make the trip come on out I'll be more than happy to spread you little punk ass all over the streets of troy. If you'd like to talk more I spend all my time at www.anibolic-source.net Til yhen happy ******* you r sheep and please do read a little more about hte rotary engine it sounds like you've got a lot off leaning to do. https://www.nopistons.com/forums/pub...O_DIR#>/ar.gif https://www.nopistons.com/forums/pub...#>/*******.gif https://www.nopistons.com/forums/pub...R#>/bsflag.gif https://www.nopistons.com/forums/pub...doublebird.gif https://www.nopistons.com/forums/pub...IR#>/devil.gif https://www.nopistons.com/forums/pub...R#>/violin.gif https://www.nopistons.com/forums/pub...1047683431.gif https://www.nopistons.com/forums/pub...1047683517.gif
|
Originally Posted by BigTurbo74' date='Jan 26 2004, 01:58 AM
if anyone has some t2 side housings or rotors for cheap let me know,haha. oh yea thanks for standin up for me guys https://www.nopistons.com/forums/pub...IR#>/bigok.gif
just get turbo side plates and eshaft |
haha i just checked my pm's
**** you, you little queer, Jan 25 2004, 10:15 PM rotor Group: Banned Posts: 36 Joined: 14-June 03 you little bitch don't threaten over the net just drive you ****** ass out here I'll be waiting for ya. haha that's funny, i don't remember threating him? weird... anyway, my mom works for an airline so technically i could fly out there and back for free... i think he'd be suprised if he saw the size of the "kid" he sent the engine to...but christ i didn't even post his name or addy,, why does he think i wanna beat his ass? haha |
i remember the pics from when you were all drunk working on that red FC....youre tiny!!!
|
WAIT! are you threating me!? hah
|
Originally Posted by BigTurbo74' date='Jan 26 2004, 03:06 AM
WAIT! are you threating me!? hah
|
what a freak, im glad that revvin was cool and i trusted him, he got my car working right and didn't charge me much for what i got also. been very patient too because im flippin new to the rotary world also. anywho sorry that happen bigt:(
Terron p.s. i got a cop friend in NY if you wanna, you know, msg me. |
This is a damn shame. I'm sorry for BigT. You can't trust anyone unfortunately. This piece of **** deserves a visit most definitely.
There should be a buyer/seller feedback forum added to the classifieds section. |
wow that was alot of interesting things said , the fack of the matter is he got alot of thing sold to him at a low cost the engine was pulled out of AN 87 T2 IT HAD A FEW THING DONE TO IT BUT to anyones knowledge was and still is a t2 motor as far as i'm conserd deal done he got the motor saw it handed over the money done deal it was an as is deal wich was said online and over the phone the motor runs i pulled it from a t2 with upgraded turbo and manifold if it's not what he wanted he could of said so before buying it but notting was lied about and i'm not going to go into the whole name calling or bitching it's far from mature but i would perfer every one knowing the fact before they go rambling off i hope he can make best with what he bought , i loved rx7's they are great cars but i know very little never claimed otherwise . So do me a favore refram from threats that none of you can follow through with it's not between any of you and don't worrie no need to ban me i have no need for this site , and for the other guy that had alot of **** to say give him a brake he's doing what family does best pertect ! you'd all do the same i have never lied nor have i ever sold things on a regular basis i don't cheat it's not worth it . it's a shitty situation for him .... he thinks but i feel i did my part to my knowlegde . as is for 800.00 brand new turbo manifold upgrades etc. he got a deal .
|
So who is that rotor guy, he seemed to know an awful lot about the situation.
|
yeah elliot is a trustable guy. he has helped me out in the past. as for bigturbo, sorry about the situation your in.
|
that was his brother i'm guessing. the one who was dwelling on the "fact" that they made a 6port turbo motor stock. anyway, william- dude i was frustrated as hell, and pretty worked up because like i said i've been waiting for this for a while. but in reality i do think i did get a decent deal and i don't wanna burn any bridges because in my mind you seemed to be a cool person, and if you can also put this behind us i think we would be cool again. i just really don't appreciate your bro gettin on and having to start all this drama out of something that's not even his business. i mean come on, i don't think i threated you or your brother but he feels like i did for some reason... like i said before let's just move on with our lives and let this die.
|
You guys wanna see how to make some ghetto work??
It doesn't even cover both port runners on the rear and front iron. LOL It only covers 3/4s of all the port runners... This was by far thee most ghetto bastardized motor I have ever seen in my life or on the net. |
good job
|
I wish we would have cracked it while his parents were there, that would have be very cool.
|
That is so horrible I think it would even scare Monster Garage away...
|
I mean i'm happy that all the bs is overwith but i mean just because the engine has a turbo on it doesn't mean it's a turbo engine! i mean i guess you would have to know a little to know what and could be a mistake easily made, but DAMNIT i didn't get what i paid for and william didn't even acknowledge that point to me....(that's why i was pist off) damnit i need a beer
|
rotor can get over steamed and out of control he shouldn't have gotten into it but alot of people on here did the same and you i don't think made any threats but a few other people did and that i didn't appreciate my brother and i don't take well to threats from little kids ( not meaning you BT74) but others. we never had the engine apart only the intercooler off, and the upper manifold to get the injectors cleaned and blueprinted. i'm glad this bs is behind us and i agree you seamed like a cool man as well . but any of the other guys on the forum that had nothing to do with this deal -- mind your business and don't make threats that non of you could fulfill . and be assured that if anyone comes to my house and steps foot on my property and thinks they can threaten me is very foolish and have a serous problem because i wont take that very well and understand i'm far from a little kid . for the people on this forum that has help me over this past yr with the rx7's thank you and to you big t74 i hope you can get to that race and put out 600 + hps
and to you revvin7 i hope the bushing work out well for you good bye . |
Ok its over so is this thread. No point in talking to people who can't hold a conversation anyhow. For the love of god people need to stay in English classes past 4th grade!
|
All times are GMT -5. The time now is 11:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands