My oil cooler line busted on the way to the Dave and Busters meet, but I still had alot of fun. Everybody was wondering why I was laughing and smiling. Maybe I'm warped? :sigh: My mother picked up a set of used lines for me from T&R Racing. So by tomorrow I should be back in business. I'll be getting stainless steel lines tomorrow.

did you go into D&B i was in there when you showed up? have a good time besides car breaking :(

No, we just hung out in the parking lot because there were already people there. We got to hear the 1st gen. with a bridgeport. :smilewinkgrin:

No, we just hung out in the parking lot because there were already people there. We got to hear the 1st gen. with a bridgeport. :smilewinkgrin:[/quote]

dammit. knew i shouldn't have stayed in dave and busters so long! i think i heard the first gen with bridge port was it the red one ? i can't wait to have some more meets. every time we get more and more people to go https://www.nopistons.com/forums/pub...IR

No, we just hung out in the parking lot because there were already people there. We got to hear the 1st gen. with a bridgeport. :smilewinkgrin:[/quote]

dammit. knew i shouldn't have stayed in dave and busters so long! i think i heard the first gen with bridge port was it the red one ? i can't wait to have some more meets. every time we get more and more people to go https://www.nopistons.com/forums/pub...IR[/quote]

Yeah, it was the red one. Hopefully everfything will be fine since just about everything has broken now.

No, we just hung out in the parking lot because there were already people there. We got to hear the 1st gen. with a bridgeport. :smilewinkgrin:[/quote]

dammit. knew i shouldn't have stayed in dave and busters so long! i think i heard the first gen with bridge port was it the red one ? i can't wait to have some more meets. every time we get more and more people to go https://www.nopistons.com/forums/pub...IR[/quote]

Yeah, it was the red one. Hopefully everfything will be fine since just about everything has broken now.[/quote]

i think i'm looking forward to the day every single part has broken on my FD...... that way i know there can't really be much left to break https://www.nopistons.com/forums/pub...DIR#>/wink.png

No, we just hung out in the parking lot because there were already people there. We got to hear the 1st gen. with a bridgeport. :smilewinkgrin:[/quote]

dammit. knew i shouldn't have stayed in dave and busters so long! i think i heard the first gen with bridge port was it the red one ? i can't wait to have some more meets. every time we get more and more people to go https://www.nopistons.com/forums/pub...IR[/quote]

Yeah, it was the red one. Hopefully everfything will be fine since just about everything has broken now.[/quote]

i think i'm looking forward to the day every single part has broken on my FD...... that way i know there can't really be much left to break https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote]

If I run at the track and run 25 PSI I'll probably be looking for new axles.

No, we just hung out in the parking lot because there were already people there. We got to hear the 1st gen. with a bridgeport. :smilewinkgrin:[/quote]

dammit. knew i shouldn't have stayed in dave and busters so long! i think i heard the first gen with bridge port was it the red one ? i can't wait to have some more meets. every time we get more and more people to go https://www.nopistons.com/forums/pub...IR[/quote]

Yeah, it was the red one. Hopefully everfything will be fine since just about everything has broken now.[/quote]

i think i'm looking forward to the day every single part has broken on my FD...... that way i know there can't really be much left to break https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote]

If I run at the track and run 25 PSI I'll probably be looking for new axles.[/quote]

as long as you don't launch at 7000 rpm you will be fine just slip the clutch at 3500rpm. you won't break anything https://www.nopistons.com/forums/pub...IR#>/smile.png

No, we just hung out in the parking lot because there were already people there. We got to hear the 1st gen. with a bridgeport. :smilewinkgrin:[/quote]

dammit. knew i shouldn't have stayed in dave and busters so long! i think i heard the first gen with bridge port was it the red one ? i can't wait to have some more meets. every time we get more and more people to go https://www.nopistons.com/forums/pub...IR[/quote]

Yeah, it was the red one. Hopefully everfything will be fine since just about everything has broken now.[/quote]

i think i'm looking forward to the day every single part has broken on my FD...... that way i know there can't really be much left to break https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote]

If I run at the track and run 25 PSI I'll probably be looking for new axles.[/quote]

as long as you don't launch at 7000 rpm you will be fine just slip the clutch at 3500rpm. you won't break anything https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

But then I won't have as much fun.

No, we just hung out in the parking lot because there were already people there. We got to hear the 1st gen. with a bridgeport. :smilewinkgrin:[/quote]

dammit. knew i shouldn't have stayed in dave and busters so long! i think i heard the first gen with bridge port was it the red one ? i can't wait to have some more meets. every time we get more and more people to go https://www.nopistons.com/forums/pub...IR[/quote]

Yeah, it was the red one. Hopefully everfything will be fine since just about everything has broken now.[/quote]

i think i'm looking forward to the day every single part has broken on my FD...... that way i know there can't really be much left to break https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote]

If I run at the track and run 25 PSI I'll probably be looking for new axles.[/quote]

as long as you don't launch at 7000 rpm you will be fine just slip the clutch at 3500rpm. you won't break anything https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

But then I won't have as much fun.[/quote]

you'll have more fun driving your car home :sigh:

No, we just hung out in the parking lot because there were already people there. We got to hear the 1st gen. with a bridgeport. :smilewinkgrin:[/quote]

dammit. knew i shouldn't have stayed in dave and busters so long! i think i heard the first gen with bridge port was it the red one ? i can't wait to have some more meets. every time we get more and more people to go https://www.nopistons.com/forums/pub...IR[/quote]

Yeah, it was the red one. Hopefully everfything will be fine since just about everything has broken now.[/quote]

i think i'm looking forward to the day every single part has broken on my FD...... that way i know there can't really be much left to break https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote]

If I run at the track and run 25 PSI I'll probably be looking for new axles.[/quote]

as long as you don't launch at 7000 rpm you will be fine just slip the clutch at 3500rpm. you won't break anything https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

But then I won't have as much fun.[/quote]

you'll have more fun driving your car home :sigh:[/quote]

Good point.

No, we just hung out in the parking lot because there were already people there. We got to hear the 1st gen. with a bridgeport. :smilewinkgrin:[/quote]

dammit. knew i shouldn't have stayed in dave and busters so long! i think i heard the first gen with bridge port was it the red one ? i can't wait to have some more meets. every time we get more and more people to go https://www.nopistons.com/forums/pub...IR[/quote]

Yeah, it was the red one. Hopefully everfything will be fine since just about everything has broken now.[/quote]

i think i'm looking forward to the day every single part has broken on my FD...... that way i know there can't really be much left to break https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote]

If I run at the track and run 25 PSI I'll probably be looking for new axles.[/quote]

as long as you don't launch at 7000 rpm you will be fine just slip the clutch at 3500rpm. you won't break anything https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

But then I won't have as much fun.[/quote]

you'll have more fun driving your car home :sigh:[/quote]

Good point.[/quote]

too bad i never think of that when i'm staging holding the rpms at 8000 rpm and i would drop the clutch on my GTU :sigh:

https://www.nopistons.com/forums/pub...IR#>/devil.gif https://www.nopistons.com/forums/pub...#>/BURNOUT.gif

Good news: The used oil cooler lines work. https://www.nopistons.com/forums/pub...#>/biggrin.png The short line had a hole cut in it from rubbing against the radiator support. I'll be getting some good SS lines this week.

sweet. i can't wait https://www.nopistons.com/forums/pub...IR#>/smile.png

sweet. i can't wait https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

I can, because I have to pay. :dontgetit:

sweet. i can't wait https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

I can, because I have to pay. :dontgetit:[/quote]

i don't want to hear you complain. you are atleast paying for repairs on a car you get to drive :sigh:

sweet. i can't wait https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

I can, because I have to pay. :dontgetit:[/quote]

i don't want to hear you complain. you are atleast paying for repairs on a car you get to drive :sigh:[/quote]

Yeah, that's true. I think I'm going to order the Racing Beat oil cooler lines today. I was going to make them, but I remember it costing close to $150 for all of the parts and adapters. For an extra $50 I can have them ready made, just in case I screw up.

sweet. i can't wait https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

I can, because I have to pay. :dontgetit:[/quote]

i don't want to hear you complain. you are atleast paying for repairs on a car you get to drive :sigh:[/quote]

Yeah, that's true. I think I'm going to order the Racing Beat oil cooler lines today. I was going to make them, but I remember it costing close to $150 for all of the parts and adapters. For an extra $50 I can have them ready made, just in case I screw up.[/quote]

will u through up some pix plz? and do u think they will raise oil pressure? tell us how they work out, i might be gettin some soon. :sigh:

sweet. i can't wait https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

I can, because I have to pay. :dontgetit:[/quote]

i don't want to hear you complain. you are atleast paying for repairs on a car you get to drive :sigh:[/quote]

Yeah, that's true. I think I'm going to order the Racing Beat oil cooler lines today. I was going to make them, but I remember it costing close to $150 for all of the parts and adapters. For an extra $50 I can have them ready made, just in case I screw up.[/quote]

will u through up some pix plz? and do u think they will raise oil pressure? tell us how they work out, i might be gettin some soon. :sigh:[/quote]

I'll try to take some pictures when I get a chance. I'll let you know how I like them.