so i'm about to be given a set of 20b side housings and an eshaft. 3 new rotor housings and seals at mazdacomp pricing is a cool $3800......



i paid $3800 for my jspec motor, complete with all the stuff on it.



rebuilding these isnt for the faint of wallet!

That is pretty expensive. Are you going to stick with Haltech?

interested in parting with the thick int. plate? https://www.nopistons.com/forums/pub...#>/biggrin.png

what happened to the last one? Haltech related failure?

yeah stupid e11 kept freezing up on me, it kept leaving me stuck places.



this time i'm gonna use something else, although what i dunno

Maybe try a MegaSquirt? I spent the last few hours setting up another 20B wiring harness I acquired recently on my 20B (hey, how's my old harness doing?). I've already seperated the important wires from the rest of the mess. I'm A) looking for a good place to mount the ECU up under the dash or whatever, B) debating on length of wiring harness from ECU to original Cosmo wires, and C) wondering how and where to route them. Oh yeah, and D) I still need to add a post-pump filter and route the new fuel line into the engine bay and up to the rails. The filter I picked up today is really cool with 3/8" barbed ends and a welded steel body; perfect for adding behind a Walbro 255 according to a fellow MegaSquirter who recommended it to me whose engine puts out like 450HP or so with the same filter and pump. It was only $9.02 after sales tax. https://www.nopistons.com/forums/pub...DIR#>/cool.png



The cost of a MegaSquirt certainly can't be beat. I'll be the first to try one on a 20B. I've loaded some working NA rotary fuel and spark tables (maps) into it (actually the spark table is something I came up with on my own, but it's based on a working one and it's what I'll use the first time I try to fire up the engine). It's set up to run leading ignition only, but I think we all know trailing doesn't do anything for power, so I'm ok with it. Plus, each leading plug will receive the FC-like second spark 180° after the first spark at the normal time. No other ECU can do this to my knowledge and the stock Cosmo ECU certainly can't. I really like what it did for my 13Bs, so I can't wait to hear how my 20B will run with it (my dizzy was modded to produce the same type of sparks, and the engine reved very nicely buit didn't want to idle thanks to the makeshift carb I used when I briefly test ran it last year). Or if I prefered a more traditional ignition like everyone else with an E6K or whatever, I could spark leading and trailing together only once per rotor face with no split. Either/or. I have a feeling, however, that I will end up prefering the dual leading sparks instead. https://www.nopistons.com/forums/pub...IR#>/smile.png

I think I'll start off with the ECU in the glove box with enough slack in the wiring harness to install it somewhere else later. Reason being there is so little room in this car and I'd like to get this done soon. I'll worry about the details later.

[quote name='Jeff20B' date='Mar 29 2005, 01:47 PM']I think I'll start off with the ECU in the glove box with enough slack in the wiring harness to install it somewhere else later. Reason being there is so little room in this car and I'd like to get this done soon. I'll worry about the details later.


[/quote]



yah, glove box is a good spot for it anyways.



i'm not sure what ecu i'm gonna use, i'm leaning toward the wolf, cause 13b ace is gonna use one on his pickup, so i can see it working.

TecIIIr...



how much is the wolf? if it isnt much more I would do the tec III. I am very impressed with its capabilities!

Don't you have to use TEC's 60-2 wheel?