i need to know the correct secance
grank angle tooth for ignition and injection and is the OMP pinout the same as an FD ( 3 of the 4 grounds to the ECU are the same color as the FD... i suposed that it is the same and the omp buzz ( 17 to 21 % opening) thx in advance and sorry for my bad english |
Our 20B firing order is 1 - 2 - 3.
I've *heard* there are 20B's with firing orders of 1 - 3 - 2, but I've never seen it in person. Until I hear of first-hand experience, I think it's safe to say all 20B's are 1 - 2 - 3? -Ted http://fc3spro.com/ |
Ted, my modded dizzy was 1-3-2-1-3-2 with an event every 60° of eccentric rotation. It's not your average firing order. The original firing order of my engine is 1-2-3 as shown by rotor position while cranking by hand.
|
you mean that the secance is 1-2-3 with 120° separate them? exact 1/3 1/3 1/3 balanced?
and for the metering pump stepper pinout? sry for my bad english... |
[quote name='RX-Jesus' date='Jul 20 2005, 11:02 AM']you mean that the secance is 1-2-3 with 120° separate them? exact 1/3 1/3 1/3 balanced? [/quote]
That is correct. and for the metering pump stepper pinout? We just throw those away. https://www.nopistons.com/forums/pub...IR sry for my bad english... [snapback]740548[/snapback]
-Ted http://fc3spro.com/ |
|
Mine is 1-3-2.
-Destin |
I there an advantage to either firing order?
|
[quote name='The Ultimate 7' date='Jul 26 2005, 09:40 PM']I there an advantage to either firing order?
[snapback]742936[/snapback] [/quote] I'm curious also. -Destin |
An advantage? If your eccentric shaft was machined for the 1-3-2 firing order, then yes it is advantageous to run it that way. Mine is 1-2-3, batch number 756. It's an early engine, never opened, so I'm running it NA.
|
All times are GMT -5. The time now is 09:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands