NoPistons -Mazda Rx7 & Rx8 Rotary Forum - Vacuum Line Routing On An 84 Gsl

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)

- 1st Generation Specific (https://www.nopistons.com/1st-generation-specific-16/)

- - Vacuum Line Routing On An 84 Gsl (https://www.nopistons.com/1st-generation-specific-16/vacuum-line-routing-84-gsl-8556/)

I have the haynes manual, and got most of the vacuum lines to where they should be, but theres a few left, and the haynes doesnt have anything on those.

The arrows point to the nipples left, and some of the pics show the same ones, just from a different angle. I need to know where vacuum lines go for these.

http://home.sprintmail.com/~dja4near/POS/001.jpg

http://home.sprintmail.com/~dja4near/POS/002.jpg

http://home.sprintmail.com/~dja4near/POS/003.jpg

http://home.sprintmail.com/~dja4near/POS/004.jpg

http://home.sprintmail.com/~dja4near/POS/005.jpg

And what is this, and where does it go?

http://home.sprintmail.com/~dja4near/POS/006.jpg

damn post whoring!!!!

Thanks for the help.

If the hole for the deceleration control butterfly valve was never blocked off, would it cause a vacuum leak big enough for the car to not want to start?