NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   1st Generation Specific (https://www.nopistons.com/1st-generation-specific-16/)
-   -   Turbo Fb Pixs (https://www.nopistons.com/1st-generation-specific-16/turbo-fb-pixs-19020/)

1Revvin7 06-14-2003 03:33 AM

Met him over the forums, he should be joing soon... 87 t2 motor just completed the swap into his 84...

1Revvin7 06-14-2003 03:34 AM

volvo intercooler, fd 3" exhaust the whole way out... rest is stock..

1Revvin7 06-14-2003 03:35 AM

can u believe this is a macco paint job? Its just a temp he said but man that looks good for $275... oh he also has a walbro fuel pump

1Revvin7 06-14-2003 03:36 AM

t2 dash installed, guess he didn't want to mess around with the wiring...

Racer X 06-14-2003 04:16 AM

Cool.Can't wait to have my T2 powered 84 running. https://www.nopistons.com/forums/pub...IR#>/bigok.gif How's yours coming 1Revvin?

Racer X 06-14-2003 04:20 AM

I see a NA Elbow. https://www.nopistons.com/forums/pub...#>/biggrin.png I plan on doing that when I go FMIC to get rid of the funky bend to the throttle body the stock elbow gives.

j9fd3s 06-14-2003 09:55 AM

man theres a lot of stuff under the hood, stock ecu though



mike

Directfreak 06-14-2003 03:32 PM

WTF? How did he merge two dashes? https://www.nopistons.com/forums/pub...1047683664.gif



He bolted the engine intake to the strut bar too? https://www.nopistons.com/forums/pub...1047683561.gif



Crack goes the intake.. https://www.nopistons.com/forums/pub...O_DIR#>/11.gif



PVC intercooler piping.. https://www.nopistons.com/forums/pub...1047683358.gif



Looks good, he just needs to finish it right.

ioTus 06-14-2003 09:56 PM

How does he handle the boost creep with the stock setup and 3" exhaust an fmic?

rxseven 06-14-2003 10:35 PM


Originally Posted by ioTus' date='Jun 15 2003, 02:56 AM
How does he handle the boost creep with the stock setup and 3" exhaust an fmic?

Port the hell out of the wastegate, maybe?

ioTus 06-14-2003 11:08 PM

Yea i guess, i'm looking at dioing this swap, and its looking like a haltech or wolf3d or something is going to be just as easy and just about the same cost as adapting the stock setup to work....

Racer X 06-15-2003 01:59 AM


Originally Posted by ioTus' date='Jun 14 2003, 08:08 PM
Yea i guess, i'm looking at dioing this swap, and its looking like a haltech or wolf3d or something is going to be just as easy and just about the same cost as adapting the stock setup to work....

Unless the stock setup comes with it. https://www.nopistons.com/forums/pub...#>/biggrin.png

Racer X 06-15-2003 02:02 AM


Originally Posted by Directfreak' date='Jun 14 2003, 12:32 PM
WTF? How did he merge two dashes? https://www.nopistons.com/forums/pub...1047683664.gif



He bolted the engine intake to the strut bar too? https://www.nopistons.com/forums/pub...1047683561.gif



Crack goes the intake.. https://www.nopistons.com/forums/pub...O_DIR#>/11.gif



PVC intercooler piping.. https://www.nopistons.com/forums/pub...1047683358.gif



Looks good, he just needs to finish it right.

You never saw the hack job install pic?look closely.You see they way its sitting that theres some serious cutting going on there.He even pulled the steering colum trim off to make room for it.He should have just sliced into the stock electrical.That looks like a backyard hack job in my own opinion. https://www.nopistons.com/forums/pub...1047683561.gif

setzep 06-15-2003 05:07 PM

He live in MN like us?

Agree with directfreak on the intake and PVC deal.

1Revvin7 06-16-2003 02:40 PM

Yeah it needs to be cleaned up. He lives in st louis park. I am still waiting on my k2 rail https://www.nopistons.com/forums/pub...IR#>/wacko.png


All times are GMT -5. The time now is 06:54 AM.


© 2024 MH Sub I, LLC dba Internet Brands