Well, here's the story. My dad, my friend, and I took a running 12A motor out of a FB and transplanted it into a much much nicer 85GS.



We put a Holley /w RB intake on it and RB Header. We cannot get it to start no matter what we do. I've replaced the fuel filter and the fuel pump, and I removed all the emissions. The carb is getting fuel so I know it isn't that. There's no spark from the Trailing plugs but the trailing coil is getting power. We've tried different plugs but its the same problem.



My dad used to build rotaries and he said he's never had this happen to him before, but he has never worked on a newer 12A... it was always older 13B's and 12A's from RX-3's and R100s...



Does anyone have an idea what's going on? I really need this car running cause I have no transportation to school or work :/.



Thanks

Start here:



http://www.rx7club.com/showthread.ph...hreadid=162062



Then check your trailing ignitor. Jeff20b has a test procedure on his website I believe.