Alright, I'm planning a few mods for the engine compartment (ram air) and figured while i was in there i'd do a few completely asthetic mods too. So what i need is some inspiration. Post some pictures of your engine compartments. I don't care if all you've done is put split loom around the wires. Hell show me your stock engine compartments, i dont care. https://www.nopistons.com/forums/pub...IR#>/smile.png



Here's mine:

http://kungfu.zapto.org:8085/~p0sta1...X7-Engine3.jpg



mope pix heerz0rz



I'm thinking chrome and black and what i cant paint or chrome i'll put that wire mesh stuff on. So post away!

Does it have to be a 1st gen?

Well, i was hoping for a bunch of 1st gen engine compartments but the 1st gen specific forum is SLOW AS HELL so go ahead and post any gen pix https://www.nopistons.com/forums/pub...IR#>/smile.png I'm really just looking for some cool-ass things to get my creative mind going. So if you have any pictures of some interesting engine mods post them too i guess. https://www.nopistons.com/forums/pub...IR#>/bigok.gif

Im looking forward to seeing everyones engines..

Heres Mine.

No nest - air - power - air pump - cats - EGR

18x2.5 in exhaust with gen. cherry bomb

Floats adjusted a little rich

Still lookin for MSD and Blasters

A 9 psi fuel pump and adj. reg.

Cooler air induction

And an adjustable brake regulator.

Struts and a small roll cage and Ill be set!......and tires.

I do have One strange MOD Im about to do. Im going to take a set of three speedo cables and a heater/choke cable and Im going to Weld a speedo cable onto my air screw, my throttle/idle screw, and my accellerator pump screw. And im going to fasten a choke cable to the dizz and then im going to run them all to knobs on the dash. I'll be able to do complete adjustments on the fly. SICK!!!

Thats coming next week.

apparently there aren't any 1st gens with engine compartments on here. :p

here

Here is mine !