It doesnt say in the manual, but do I crank the engine while I check the coil resistance or do I just turn on the ignition???
|
I checked it while it was running and I got no reading. How can it run if the coils arent working?? If I take the wire boot off the coil---it sparks.
Am I doing this right, sometimes the Manual just doesnt cover things like this enough. |
Last I checked, when taking ANY resistance measurement... Part one is ensuring there is no power applied to what you're measuring resistance on.
|
yea that a good way for **** up you voltmeter. unfortunately Reading from the coil don't mean that your coil is good always. if you in doubt get the JACOBS COILs its about 40 bucks and its puts a foot in the asss of it's competitors.
|
Im getting 002 on the leading and 005 on the trailing.
|
What can i say the leads are with in range but the trails are a little high
its just hit mor miss man with coills... if you in doubt replace them.. its only four bucks |
what ever you do DO NOT GET MSD coils..... I swear MSD stands for (My Spark Dies)
Edit: you need to close your tags. Hit the Close all Tags button if your unsure. https://www.nopistons.com/forums/pub...DIR#>/wink.png |
Where do you get them for four bucks!!??
|
try ebay
if not try jacobs web page or depending on where you live thier might be a speed shop that has them COIL PAGE @ jacobs take a look I think you`ll be impressed. |
All times are GMT -5. The time now is 02:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands