1 Attachment(s)
Well,
We had a really nice time on Saturday with the MRCCFL crew. We had a Dyno Event, a BBQ, and a tour oss the SpeedSource shop which is building competitive RX-8's for Daytona! I have a REALLY Good Video of my Car doing the Dyno runs, but I don't have a host that can support many users & high bandwidth. Anyway - I did Three pulls. 1) Stock Wastegate Spring at 9 PSI = 270 RWHP 2) Boost set to 12 PSI (What I normally use) = 315 RWHP It got a little lean at the top, so we decided to re-jet it for the higher boost runs for safety. Then: 3) Boost set to 17 PSI = 370 RWHP. All Done on a Holley Blow-Through system, on regular pump gas. Here is the Dyno sheet with all three runs: |
My tuner believes on C-16 (Race Gas) I could easily go to 23 PSI safely which should produce about 460 RWHP.
I think I'll try that combination at the track for the hell of it https://www.nopistons.com/forums/pub...IR#>/smile.png So, who's going to host the VIDEO's? I have: |
i acn host any video you have. gotta send it on AIM though
|
https://www.nopistons.com/forums/pub...DIR#>/ohmy.png I knew that turbo was good but damn that thing must haul ass its so light
|
|
8.85MB? https://www.nopistons.com/forums/pub...DIR#>/ohmy.png Better be worth the wait
|
Damn that thing sounds killer.I must work on mine now.Thanks DF
|
wow thats nice numbers df! the hp and tq curves are really nice too https://www.nopistons.com/forums/pub...#>/biggrin.png . is the motor a stock port?
|
Yes, Stock Port. https://www.nopistons.com/forums/pub...IR#>/smile.png
|
Originally Posted by Directfreak' date='Jan 26 2004, 08:58 AM
Yes, Stock Port. https://www.nopistons.com/forums/pub...IR#>/smile.png
|
Very, very, very cool. https://www.nopistons.com/forums/pub...IR#>/bigok.gif
|
Originally Posted by Directfreak' date='Jan 26 2004, 08:58 AM
Yes, Stock Port. https://www.nopistons.com/forums/pub...IR#>/smile.png
|
Originally Posted by Racer X' date='Jan 26 2004, 07:08 PM
I remember why I love the RE's now. https://www.nopistons.com/forums/pub...#>/BURNOUT.gif https://www.nopistons.com/forums/pub...1047683473.gif
|
https://www.nopistons.com/forums/pub...DIR#>/ohmy.png stock port?! what else do you have on there aside from tha single turbo? probably a dumb question but those side housings from tha RE can fit any 13b? if so will it still deliver good power? sorry if im hijackin this post
|
The side housings will fit any 13B from 86+. It's basically a 3rd gen Motor with restrictive exhaust sleeves and Large intake runners.
|
I can watch the video but I can't hear it :( Well I can hear the first 1/2 sec then it goes silent. Doh! Car looks good though! I should get mine to a dyno this summer...
Good job! |
Dammit Cam. I put it in DiVX so you and your damn Mac could watch it.
Make sure you have the latest DiVX Codecs. |
I downloaded 5.1 last night with the mp3 decoder thinking it would work for your video. SOB, I really want to hear that sucker.... Seeing it without the sound is like going to a stripclub blindfolded! ahhhh!
|
Originally Posted by Directfreak' date='Jan 27 2004, 04:03 PM
Dammit Cam. I put it in DiVX so you and your damn Mac could watch it.
Make sure you have the latest DiVX Codecs. I can view it on my Mac, running latest version of VLC. |
VLC? What's that? Basically what do I need to get to watch this damn video! https://www.nopistons.com/forums/pub...IR
|
Ok, did a update and now I can see it AND hear it https://www.nopistons.com/forums/pub...#>/biggrin.png
I love how the car sounds! Not so damn loud like mine. I liked the low boost pull the best because you can hear the compressor the most. It will be interesting to see if you can top 370 with the cosmo intake/haltech on it. DAMNIT I wish it wasn't 3 deg outside! You're killing me! I guess it's time to chop some wood and get that stove going so I can catch up to you. You got me beat for the time being https://www.nopistons.com/forums/pub...DIR#>/wink.png |
All times are GMT -5. The time now is 01:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands