Time to ***** it up since I don't have a host.



Engine

FC oil filter pedestal

Mazdatrix oil lines for an FC

FC oil cooler

FC fuse block

TII alternator and old ass dual pulley

Outside (it was raining, so I blurred the edges alot for fun)

Inside (after dark with no flash)

All these are taken from about 10 feet away.



Carb is a Weber 45 DCOE and exhaust is RB Street Port.



Right click and save as (till the site goes down LOL)



Carb with the hood closed:

http://www.geocities.com/turboiimazdarx7/w...eber_closed.wav

Hood open:

http://www.geocities.com/turboiimazdarx7/w.../weber_open.wav

Exhaust:

http://www.geocities.com/turboiimazdarx7/exhaust.wav

Are you sure that oil filter pedestal is from an FC? Sounds good!

It may be off an old 12A. I don't remember now.

One for shits and grins.

What kind of front lip is that? looks good

Mazdatrix/Wings West.

Nice 1st gen Felix.The wheels and lip look good!I need to get a 15" or bigger wheel for mine.13's spin too easily to 5000 rpm in 2nd.I hate that so much.Hopefully I can get paint and body work this winter then GSL-SE brakes next year.LSD will make my car a shitload faster.

My Engine bay(Before I cleaned it up)

My car(Old pic)

Nice car Felix. Love those rims.

What was the first year the RX7 was offered by Mazda?

I heard there was ultra rare 78's in North America but as far as I know for sure they started in 79.

that looks great felix. you have the same steering wheel as me. whats it off of? my passenger floorboard looks the same as yours too!

they started in 3/78, but it was a 79 model year.



mike

I really like first gen's cause they look nice with old school rims but I live in California so It sux if you wanna modify it cause of the smog regulations. What company makes the foam air filters on your carb.

Racing Beat sells them for the dellorto.I still need to buy one tho.I'll talk to them soon about it.I would fab up a CAI(cold air intake)But I strapped for cash thanks to my rolling bank book.

Its off an 88 TII.

nice job, lots of work , well worth it....

I noticed all the emmision is gone but why is the charcoal canister still there, do you have to leave it ?

If you were referring to mine.I'm not sure if I can pull the charcoal canister and the lines to it.They have steel lines from under the car going to it.

I was talking about felix's car but I guess, It would be the same for our cars sence we have all most the same set up. unless I get that street ported motor. I am looking at the haynes manual and on the 2nd gen n/a, the lines off of it go to the check valve and a line into the motor under the oil filter https://www.nopistons.com/forums/pub...IR#>/dunno.gif

I left it to absorb the gas fumes.

Is that a 12A or 13B, and what kind of carb is that?

Felix has a weber 45 DCOE on his car.Mine runs a Dellorto sidedraft setup on my 13b.