i have an 85 base model with a racing beat intake and edelbrock carb. is there some where on the carb i can hook the oiler lines? https://www.nopistons.com/forums/pub...1047683894.gif

Unless the Edelbrock was pre-tapped for the oil lines, I don't believe you have anywhere to put them. I've known of some folks tapping into the float bowls with fittings and then connecting the lines and they seemed to work ok. You can do away with the oil lines and just premix your fuel for an alternative. Hope that helps.



Todd B.

what needs to be done to remove it

Just make sure the linkage is not connected from the carb to metering pump. this will ensure the metering pump will not function. Than, you can remove the lines and cap the fittings on the metering off with a couple of vacuum caps. Then you are off to the motorcycle shop for some premix. The Maxima Gold line (Castor 927) is what I've always used in my racing 2 stroke 4-wheelers. You can get it in pints, quarts, gallons, etc...and it smells great and burns super clean. Hope this helps. I gotta head out to my shop. You can email me there with any other questions (nolimitperformance@adelphia.net).



Todd B.