I have an 80 motor in an 85. And don't know where to hook up the oil pressure or temp forget which one. Just curious if there is a place to do it or if you have to get some special hook up for it. Maybe I just over looked it somewhere.
|
Try sending sgieldona pm he has a 80 engine in a 84.I can't remember what he did on that one.There is a thread he made in this forum somewhere.
|
Good Morning All;
If you can find the Oil Sender from a under filter style oil cooler the next step is to order a adapter from Racing Beat. Part # 11802 (Oil Pressure and Temperature Adapter) Cost $48.00US The Sender is a 2.5inch round brass looking with a 1/8npt fitting that screws into this adapter. Just block the Temp outlet if your not goin to use it. The adapter from RB comes with new O rings and 2 bolts. Took me about 15mins to do the hole thing. Just remember to use Tefflon tape when installing the sender to the adapter. If you can't find a sender, the Mazda dealer sells them for $22.00. This setup will work like a charm if you follow these direction. Any questions email me at sgieldon@earthlink.net Steve https://www.nopistons.com/forums/pub...#>/BURNOUT.gif |
Originally Posted by sgieldon' date='Dec 29 2002, 05:28 AM
Good Morning All;
If you can find the Oil Sender from a under filter style oil cooler the next step is to order a adapter from Racing Beat. Part # 11802 (Oil Pressure and Temperature Adapter) Cost $48.00US The Sender is a 2.5inch round brass looking with a 1/8npt fitting that screws into this adapter. Just block the Temp outlet if your not goin to use it. The adapter from RB comes with new O rings and 2 bolts. Took me about 15mins to do the hole thing. Just remember to use Tefflon tape when installing the sender to the adapter. If you can't find a sender, the Mazda dealer sells them for $22.00. This setup will work like a charm if you follow these direction. Any questions email me at sgieldon@earthlink.net Steve https://www.nopistons.com/forums/pub...#>/BURNOUT.gif |
Ok man. thanx a lot. I might do that sometime, but don't really want to put money into that right now. need to fix my driveshaft first.
|
Hello RacerX;
The machine is working FINALLY. My new Yokohama Tires where sopposed to be in yesterday and the tire shop has my wheels. they recieved 1 tire. Sooo the RX is still sitting on jacks. I ran it for 2 hours yesterday and did alot of fine tunning and she PURRRRSSS like a Vagina. I can't beleive that I figured out the wireing! I'm kind of like a Tim Allen when it comes to that. Project for today: Try to insulate my Holley Blue Pump. That sucker sure is noisy. Have you read the timing question I posted this Morning? Take care and keep going Round & Round Steve P.S. Whats your name anyway sgieldon@earthlink.net https://www.nopistons.com/forums/pub...#>/BURNOUT.gif |
Hey steve glad to hear your car is good to go.What type of wheels are you getting and what size?My name is Luis.
|
All times are GMT -5. The time now is 08:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands