that car is awesome!! What i do not get is the fact that i have been told time and time again that i should NOT turbo a united states 12a. Something about it blowing up really easy.... But that has a arkay on it so i am not sure what to think anymore...

Very, very nice.It's wonderful to see something that rare fall into good hands & will begin a new life with someone who cares about it. Enjoy...

You can turbo any motor. It's all in the quality of parts used and most importantly it's IN THE TUNING!!!! Plus, you have to be realistic about your goals. I wouldn't expect a US spec 12A to be able to hold 15 pounds of boost on pump gas or anything. But you can surely turbo a 12A and have it be reliable.







Thanks for the compliments Ernie. I did more work on the car today and will be doing more tomorrow as well. I'll update this thread again soon with more info and pictures.



Zach

Ok, I only had a couple of hours to work on the PA this morning but here's what I got done. I pulled the Weds off so I can get the rotted tires removed. Then they are going to get taken apart so I can get the dishes re-polished and get the center section re-powder coated. I'm also going to see if I can find a shop that can re-work the center caps. They are starting to show their age.



Attachment 20235



Front wheel well:

Attachment 20236



Rear wheel well:

Attachment 20237



Dirty wheels off the car:

Attachment 20238



One clean wheel after simply rinsing it off for a couple of minutes:

Attachment 20239



Check out the added bracing they bolted onto the bottom of the car:

Attachment 20240

Then I went ahead and pulled the driver's door panel off and took it apart. This way I can get the original cardboard panel replaced with new cardboard. I'm also going to get the carpet and grey vinyl replaced with new material. Everything else should be perfect again once I get a chance to clean it really well.



Driver's door panel installed:

Attachment 20228



Driver's door without the panel. I guess this makes it official that the car was white when it left Mazda:

Attachment 20229



Door panel in one piece:

Attachment 20230



Door panel in two pieces:

Attachment 20231



Door panel in three pieces:

Attachment 20232



And door panel fully torn down:

Attachment 20233



Here's the Alpine speaker pod that was on the door. It holds an electrostatic tweeter as well as a soft dome. Seems to be some really nice gear, especially when you consider how old it is:

Attachment 20234



This is the only work I got accomplished today. I'm sure that I'll have more progress to speak of after tomorrow. I'm not sure what I'm going to do but other than take off the passenger door panel and remove the speaker pods from where the storage bins would've been in a normal FB. I might remove the speaker pods on the front kick panels too. I'm going to talk to Elemental Designs about new speakers that will fit behind the original Alpine grills.



Zach

wow. some quick work! nice! But, just a point of interest for me... could you snap pistures of ALL the reinforcements they made??? When I've got money and time to blow on my car sometime in teh future, I love the look of the targa roof... and really wanted to know what these guys did to strengthen the frame enough to make it a convertible so I'll know when the time comes. If not, no biggy but thanks! The pics are awesome so far, and I'm sure you'll never regret taking this many of a buildup!

Next time I have the car up on jack stands or on a lift I'll get underneath it and take pictures of the bracing. It will probably be easiest when I pull the motor and tranny though. I was actually planning on posting up pictures of the bracing so people could see just how much work went into making this car back when it was new.



Yeah, I have only posted about 20% of the pictures I've taken so far. https://www.nopistons.com/forums/pub...IR#>/smile.gif I typically take 40+ pics everytime I do anything to the car. I want to make sure that every detail is documented for two reasons. 1. So I have a good record of what I did. 2. So if I ever need to remake anything I know exactly what it is supposed to look like and where it goes. It pays to be **** retentive sometimes. https://www.nopistons.com/forums/pub...IR#>/smile.gif



Zach

UPDATE TIME!! https://www.nopistons.com/forums/pub...IR#>/smile.gif



I started off by removing the passenger door panel just like I did the driver's door panel yesterday. Nothing new to speak of there. https://www.nopistons.com/forums/pub...IR#>/smile.gif I did notice that I counted wrong the first time I did a count on the Alpine audio system. It's a 10 speaker system instead of 8 like I originally thought. This car was WAY ahead of it's time! Here's a pic of the passenger door just for posterities sake though.



https://i74.photobucket.com/albums/i...ek%201/231.jpg



Then I started work on removing the speaker pods where the stock storage bins would normally be. And did I ever find one hell of a surprise once I got that stuff out!! Here are the pods before I got them out.



Attachment 20152



After I got them out. Here's the passenger's side pod.

Attachment 20153



And the rear shot

Attachment 20154



Here's the carpet that covered the whole area. And the second picture is the metal frame work that was under the carpet.

Attachment 20155

Attachment 20156



To be continued in my next post.

Here's what was hiding behind those rear speaker pods. This really blew me away. I bet this was one of the best audio systems in any car in 1983!! 3 amps and a pre-amp to split the signal up. PA really went all out with this system. I think I am actually going to email Alpine and show them what I have here. Then ask them if I could send them all of the speakers and amps and have them refurb the amps and replace all the drivers with new ones.



The amplifier setup:

Attachment 20146



And the top of the amps and pre-amp:

Attachment 20147

Attachment 20148



Here's the 6.5" subwoofer that was in the rear pod:

Attachment 20149



And the 4" full range that was in the same pod:

Attachment 20150



And here's the pod once I got it apart:

Attachment 20151



The trunk is next!!

Here's the trunk:



Attachment 20142



Without the carpet or insulation mat installed:

Attachment 20143



And now for yet another part that really impressed me. When I went to remove the carpet from the sides of the trunk I found that they made custom panels for most of it. In total there are 7 carpeted panels that make up the side and rear walls of the trunk. PA had incredible attention to detail!!

Here's the empty trunk now that all of the carpeting has been removed:

Attachment 20144



And finally my spare tire. The tread pattern on this tire looks odd. Like it isn't the original tire.

Attachment 20145



I made some pretty decent progress today. I still only had about 4 hours to work on the car though. But it should go back together as quick as it came apart. I have a seperate labeled zip lock bag for the hardware from each seperate area that I work on. This will really be helpful when it comes time to re-assemble the car! Thanks for reading through my most recent batch of updates. I'll be working 12 hour shifts and I'll be training still all this week so I won't be working on the car until next weekend. But if you have any questions ask them and I'll answer as best I can.



Zach