Today at 4:30am Rotaryman88 and I removed the 12A out of my 83 GSL with a chain and half a bed frame, and are 2 hands https://www.nopistons.com/forums/pub...IR#>/boink.gif



Just wanted to share that with you all

what a bare 12a is about 190lbs the most....

it wasnt bare. intake manifold,exhaust manifold, oil cooler, etc.

we had a come along and a 2x4 once upon a time....

Ive never had the money to do it any other way. HERES A TIP IF YOU DONT HAVE AN ENGINE STAND AND YOU NEED TO GET THE FLY WHEEL OFF:

Dig up(uncover)about 6 or 8in of a good size root in the yard and set the engine in front of it on a blanket with the flywheel sitting right on top of the root. Take a chain and bolt it to the flywheel at about 2 or 3 O'clock then go around the side(edge) of the flywheel and make a loop around the root at the bottom and again go back up the other edge of the flywheel and bolt it to the 9 or 10 O'clock position. make sure its tight. Now you can put 300lbs on the nut without so much as a budge from the engine. This actually works better than the engine stand since it cant take that kind of rotation either. And this really comes in handy when your trying to tourqe it back on.

Ive got pictures of me doing it on my other computer.

My father freaked when I dug a root up in his yard but he hasnt covered it back up and he's used it on three different motors since he seen me use it for the rx.

My mother still wants the root covered.

You're getting root-down.

Flywheel was no problem at all...just need the right tools man!

I had to lift my NA motor up by myself to clear the fender.Does that count?

nod1stgen- that has to be the most back woods reply I have ever herd... I like it! https://www.nopistons.com/forums/pub...IR#>/smile.png

Took an engine out with a chain and half a bed frame.. damn.

For the flywheel we used the same chain off the lifting point and attached it to the flywheel. We tore the motor down to find its pretty bad. The housing and berings are all purple and blue from the heat. It look like to use the the o rings went and just created a meltdown of the motor. It was fun first time doing it.

Look at the blue/purple color

Yea, here in the South we pull'em with Tree Limbs and put'em in with Beer Bribed friends and a little muscle.