https://www.nopistons.com/forums/pub...1047683454.gif https://www.nopistons.com/forums/pub...1047683358.gif Ok so The city i live in decided that they are going to tear up the street where i live.... well if i wasn't backing out the driveway today in the ReX to go visit the local hole in the wall muffler shop to see if he'd build me a Straight pipe for dads car....



The Tips for the muffler get caught on the 3 inch drop from the street to the dug out section in front of our drive way.... Pushed the Right one down almost Pinching the Tube and pushing the left tip up....



So now monday morning i have to go to the City to https://www.nopistons.com/forums/pub...IR#>/argue.gif with them to see if they are going to pay for my muffler...



Now i know that they are going to try and take the easy way out..... and offer either to repair the one that i have **which i'm thinking could cause problems in the future** or they are going to offer to put a replacement on....



Now i'm thinking since the Exhaust from the rotary is hotter than a piston engine a normal off the shelf muffler wouldn't stand a chance would it? https://www.nopistons.com/forums/pub...DIR#>/wink.png;) (i think you guys know where i'm going with this......)



I'm thinking this one right here if they decide to replace my Muffler http://www.racingbeat.com/resultset.asp?Pa...artNumber=16433 unless you guys have other suggestions

Do The Racing Beat Muffler!

Your right about the cheap off the shelves Mufflers.

The RB one will last you forever and you will notice a difference in Power also.

steve

sgieldon

I agree. Definately go with the RB muffler. I used one for about 6 years until I switched to a complete 3" for the Turbo. It was put on another car and is still in use. https://www.nopistons.com/forums/pub...IR#>/bigok.gif

BTW does anyone know exactly the difference in temp from a normal Piston engine compaired to that of a Rotary?



So i have something to back my story up on the whole an off the shelf muffler wouldn't last?

Accordingly to Racing Beat

Rotary Engine at Full Throttle and High RPMs = 1,700 -2,000 Degrees F

Boinger " " " " = 1,000 -1,400 Degrees F



steve

Ok so i went to the city and they stated I need to go get 3 estimates on this

so i'm going to go to Midas Minake (SP) and some other place and tell them that it needs to be either a RB or an OEM lets see which is more expensive LOL



and if the city doesn't like the estimates i bring in I'll tell em hey you buy it i'll install it it's a win win situation for the both of us :-)

just get a quote for an oem, its more than the rb



mike

Mazda Dealership is on my list https://www.nopistons.com/forums/pub...IR#>/smile.png



oh yeah here's some pics of the damage :(



http://www.4themusik.com/albums/albun00/Impactpoint.jpg

http://www.4themusik.com/albums/albu...ionanxiety.jpg

http://www.4themusik.com/albums/albun00/Exhaust1.jpg





Now mind you I had already tried to pull this back into place so it's not as bad as it was

So i went and got some estimates today all prices listed are with OEM (spec) muffler



Midas $361



Action $392



Hawks $347



so lets see what the city says



All the shops that i took it to said that it needed to be replaced that it couldn't be repaired

thats good, you have 3 consistant estimates



mike