i got it! its awesome! looks great! only $300! got it here, got it all cleaned up(outside, not inside), got all the parts out of the back, and took tons of pics! here they are



http://www.uploadit.org/Elysian893/2-Dents.JPG

2 dents in the front panel, no biggy

http://www.uploadit.org/Elysian893/Back-Left.JPG

http://www.uploadit.org/Elysian893/Back-Right.JPG

http://www.uploadit.org/Elysian893/Center.JPG

http://www.uploadit.org/Elysian893/Cracking-Bondo.JPG

cracking bondo, also no biggy

http://www.uploadit.org/Elysian893/Dash.JPG

http://www.uploadit.org/Elysian893/Front-Left.JPG

http://www.uploadit.org/Elysian893/Interior.JPG

http://www.uploadit.org/Elysian893/Keyed.JPG

small key'd spot on the drivers side door

http://www.uploadit.org/Elysian893/Left-Side.JPG

http://www.uploadit.org/Elysian893/M...Coming-Off.JPG

moldings starting to come off drivers side rear

http://www.uploadit.org/Elysian893/Right-Side.JPG

http://www.uploadit.org/Elysian893/R...OOOH-Shiny.JPG

ooooh shiny!

http://www.uploadit.org/Elysian893/Rust-Damage.JPG

small rust spots

http://www.uploadit.org/Elysian893/Rusted-Tips.JPG

tips rusted out, the rest of the exhaust is fine, car sat for almost 5 years in this guys garage, only a 6 month stint out doors

http://www.uploadit.org/Elysian893/S...-Left-Rear.JPG

small scratch

http://www.uploadit.org/Elysian893/Seats1.JPG

http://www.uploadit.org/Elysian893/Side-Panel.JPG

the trim came off the door, i got it its kinda bent, need to take a heat gun and make it not bent

http://www.uploadit.org/Elysian893/Windshield-Crack.JPG

cracked windshield, just needs replacing...



so there it is! told you 56k beware! i paid 300 for it, found a motor(1980 motor, we'll make it work) for 300, gonna put the motor in tomorrow and hope i can get it running... need to also drop the fuel tank and get rid of any gas thats in there... all the electronics work, the only big deal is the lights will go up but not come back down unless i do it manually... this car is awesome

great find man....much congrats https://www.nopistons.com/forums/pub...IR#>/bigok.gif body looks great for 300bucks good luck man have fun https://www.nopistons.com/forums/pub...1047683473.gif

Sweet deal for 300.I see you even found a rotor housing in the car?My GT-X project car even cost $600 and it wasn't in bad shape but needed fender.Why can't I find killer FB deals?I would own a block full of them by now.I guess 2 FBs is good for now.Need to start a collection of money pits tho. https://www.nopistons.com/forums/pub...IR#>/bigok.gif

Thats in nice shape. So it came without a motor then?

thats nice, especially the interior. an afternoon of work and it could look like it was new

good deal does it have a motor?

Looks pretty good. Especially for $300. Definately gives you a good starting block. Good luck with it.

looks beautiful man. and thats crazy 300 bucks! i wish i came acrosss a deal like that, oh well i got mine for 1000 and not running i guess thats close enough. nice ride, and go Pport it now. https://www.nopistons.com/forums/pub...IR#>/bigok.gif