I have an 82 rx7 with a 12a engine. I am currently working on a blowthrough project on it but I am having troubles finding a way to boost prep my carbs. I have a dual weber setup from rotary engineering. It is dual 36 dcd webers. Does anyone know how to boost prep these carbs or any place I can go to to get information or a kit or anything on how to go about doing this?



thanks for the help

rotaryshack.com . I'll be suprised you actually follow thru with this as most guys ask many questions and never get anything done.

Well I have everything else figured out pretty much and mostly everything fabricated except for the boost prep of the carbs. It is going slow but should be done in about a month or two.



Also, I have tried the rotary shack site many times and tried calling the owner but the website is down and last time I tried calling the owners phone was disconnected or something.



I have emailed a few other people and websites includeing a few VW sites and still no luck.

any luck on the carb setup??? i have the same carb setup for a 12a and have been looking for an adaptor to mate this setup to a 13bre motor... to no avale!!! let me know if you run across anything like this...

see if you can find any of these books at your local book store and see if it has teh info you need.



http://www.amazon.com/Turbochargers-HP49-B...0254&sr=1-1



http://www.amazon.com/Turbomania-Turbochar...0254&sr=1-1

i have the second one and if i can easily find it i can look and see if tehres a specific section on boost proofing carbs.



ohh and im buying this one cause it has an rx7 on the cover...

http://www.amazon.com/Street-Turbocharging...0254&sr=1-1