OK, my 85 12A GSL with 95k on it won't start all of a sudden, it has been about -15 to -20 F in SD, and my little baby started last night just fine and ran good too, then this morning my key wouldn't turn past the lock position. So I got a ride and thought i would turn the key when it gets warmer so it wasn't as frozen. It wasn't stuck later and it just wouldn't turn over. I used the choke properly and used starting fluid and got a jump. It's not the ignition system and I'm getting compression. It makes this weird sound and just doesn't turn over. I hear a grinding-like noise near the back of the engine and it sounds louder on the inside when the car is trying to turn over. It could be possible that i got water in my gas line because i lost my gas cap and used socks for a week while another was on order. I hit the car wash twice and when i pulled the socks out today to put the gas cap in, they were frozen so i put some gas line anti-freeze in. Somebody plz help me, i got a clutch kit commin tommorow and i don't kno what 2 do!!!! :twisted:
|
It could be that your gas has water in it, which might had goten frozen in the line and could casue the car not to start cause there is no gas getting into the car.
|
I've heard from the local RX-7 club that its a bad idea to run a rotary if the engine temperature is below 20 degrees. I know the new LS1's you cant start when it's too cold because of the aluminum block, so it would make sense, but who knows?
Anyways, have you checked the fuel bowl windows, to make sure their filling up and theres no ice in there? And are you sure your getting spark? the distributor rotor can contract and not work properly in cold weather, though unlikley. And have you checked the plugs to see if their wet? Just ideas.... |
I'll check that but what is the sound i hear when i crank it. It sounds like something is grinding. And when i stop the engine keeps on going for a second like shoes in a dryer tumbling after it has stopped. The clutch will be here soon and i have to get this thing running like it was yesterday. If there is ice in the line, how can i get it fixed and working again? Thanx 2 anybody that helps me. https://www.nopistons.com/forums/pub...#>/BURNOUT.gif
|
I live in central BC way up north.When It use to hit -25 I would unplug the car and dump half a liter of gas down the carb to start it with.Then wait till the guage starts to read some sort of tempature before letting off the gas.I used to hold it at 2000rpm on those days.The old 12a never let me down till the day I pulled it. https://www.nopistons.com/forums/pub...#>/biggrin.png
|
can anyone identify the sound i get when it is trying to crank over? It sounds like grinding behind the glove box.
|
:POON:
|
It still isn't working, i jumped the battery again this morning and the started slowed down in a few seconds after engauged. Someone told me the grinding and the engine still spinning a few seconds.
|
I am to fighting the cold and my 7 wont start. I am hearing a grinding sound aswell.
|
Just got the new clutch a few minutes ago, good kit purchased from eClutchmaster.com
I can't get it installed until my car is running again!!! I think i'm gonna tow it to my mechanic's shop and have it warm up in his garage. Anybody got any info on towing? I hope that solves the problem! |
Actually i think that the flywheel is binding and it wont permit my engine to start!
|
Originally Posted by 85Daddy12A' date='Jan 24 2003, 11:41 AM
Actually i think that the flywheel is binding and it wont permit my engine to start!
|
THANX A LOT GUYZ, i got it started 2day, a lot of whyte smoke and rugged running, but it runs fine. I'm gonna park it on the other side of the street so the cold air doesn't blow in the grill. THX GUYZ, now my new clutch :twisted:
|
So what was it?Was it just frozen stiff?
|
well whatever it was my engine would keep spinning a few seconds after i let off the key, it sounded like shoes in the dryer tumbling. Maybe the starter soleniod wasn't fully engaged. But it works just fine now thats the main point. https://www.nopistons.com/forums/pub...#>/BURNOUT.gif
|
Cool.Glad to hear it.Sometimes starter solenoids die before the motor itself so it wouldn't surprise me.
|
Hey 85Daddy12A, I suggested that to you! https://www.nopistons.com/forums/pub...#>/biggrin.png Just kidding, I'm glad to hear you got it running.
|
Well now it won't start again, but i figured what the grinding sound was. It's sparking from the starter from not getting enough juice from my dead ass battery. I just got fired from work last nite so i hope i get a new job soon. But I get paid 2morrow and i'll get a new battery. First I'm gonna put water in the battery. DAMN THING!!!!!
:rant: |
All times are GMT -5. The time now is 10:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands