It's just the tach that does it too.Any suggestions on why?



Luis

Well mine was doing that and it turned out to be that I had pulled off the trailing plug wire from the plug on the front rotor to check the size socket I'd need, and forgetten to put it back on https://www.nopistons.com/forums/pub...1047683664.gif but I don't think that's what yours would be https://www.nopistons.com/forums/pub...#>/biggrin.png maybe grounding problem? On the trailing coil perhaps?



J

you if its jumpy you may have something amiss under the hood



mike

well mine doesn't jump anymore, i don't know why, it just stopped.

Same.Just took it for a burn today and seems to be reading fine now.Oh well maybe DLIDFIS will fix it when I hook it up in my car.

Damn intermittent problems! https://www.nopistons.com/forums/pub...IR#>/wacko.png

Hey Luis;

This One shuld be easy for Ya!

Switch the coil wire just for the hell of it.

Or did I miss the orginal ?

steve

I'm sure the coils are hooked up right Steve.But I think I'll wire in DLIDFIS here really soon like in the next couple of days. https://www.nopistons.com/forums/pub...#>/biggrin.png

Have fun with your new project.

My last post was just a Brain Fart. We all have them once in a while.

Anyhew: Got everything hooked up yesterday and as soon as it stops raining I'm gonna fire the baby up.

Hopefully all will go well with the returned RB Holley and the New Pulley.

I'm a little confused as far where to set up the Disti and the RB Pulley???

Set it at 0% and line up the talley with the dimple or what???

Gonna call them this AM when they open up.

Everthing else should be a no brainer (I Hope).

See Ya

steve

sgieldon https://www.nopistons.com/forums/pub...#>/BURNOUT.gif

Let us know if she runs steve.I hope RB solved your carb problem for yah

Damn thing won't go below 2k on the tach or it just jumps at idle unless you give it a tap on the throttle.This is annoying as crud. https://www.nopistons.com/forums/pub...IR#>/angry.png

ARG! Now it doesn't matter if its under throttle or not its jumping all the time now.What would cause this?????



Luis

intermittant tach wire?



mike

Maybe,I'll have to check the wire out for the tach later tonight.The front cover is twice as annoying. https://www.nopistons.com/forums/pub...IR#>/wacko.png

You'll have to write a list of your problems in "priority of annoyance" and tick them off as you fix them. https://www.nopistons.com/forums/pub...1047683785.gif

Yeah,That cover needs to come off tho for the T2 motor.I tried flipping the coil wires to the dizzy the other way and it seems to be gone.............for now. https://www.nopistons.com/forums/pub...R#>/unsure.png

Yeah, tick them off like they tick you off! https://www.nopistons.com/forums/pub...1047683785.gif



Raul

Believe me its ticking me off. https://www.nopistons.com/forums/pub...IR#>/angry.png

haha, i made a list once



mike

I made a list of all the gear I had as I moved it into my shed, and then while I was doing that I made a list of **** to do..



Starts and ends in "fix rust in *insert panel name here*" https://www.nopistons.com/forums/pub...1047683358.gif

Damn that sux!