EnayEx7

I just go done changing all of my vac hoses to silicon. I also changed all of the gaskets and replaced the whole cooling system. The coolant is bypassed. When i turn the car on it would jump to 1.5k for 3-5 seconds then drop to 800. When I drive the car in neutral before i brake or turn the engine dies. Please HELP! I have the Haynes manual but it doesnt give me the info I need. The service manual helps but I only have the Turbo part of the book (N/A is missing =[) Im still a noob at this. Anyones help would be appreciated. Peace.

thatpoorguy

i don't know the 13b that well, but the complete fsm's are pinned at the top of the 2nd gen section. best of luck!

loudazzrx7

Thats the cold start kicking in when you first crank it.Adjust the throttle screw on the top of the throttle body.

LunchboxCritter

You changed which gaskets? I'm guessing manifold was removed and those are the gaskets you replaced.

What exactly do you mean the coolant is bypassed? BAC valve eliminated.

How do you drive a car in neutral? Are you saying that car dies when you shift into neutral while coasting to a stop?

Are you running a/c or other accessories when this occurs?

lonetlan

Would the dashpot have anything to do with this?

kelseybones

Rotary's are so vac sensitive. Make sure your routed absolutely correct. There are a couple really good threads here to help with troubleshooting a vac leak. When the motor dies does your dummy light come on?

vanhalen

Check the vacuum hose to the brake booster that's connected to the UIM.

Hollandj

I am haveing same thing happen the air intake hose has three vacuum connections one broke i put a universal t on it and its loose now loose would tht prevent igt to start

Hollandj

also car will not idle die every time put in neutral and wont start again the only wy is to push start it has codes 0302 -0420 ????