FCmaniac

Here is mine for the NA:



NA cold air intake



Here is the cold airbox link (underhood):



FC3S airbox



Here is Aggie's for T2:



T2 CAI



Here is Scott89T2's:



1300cc.com custom front end T2

RX7Aggie

mariah motorsports also sells a setup similar to the cold air box write-up, premade, and better looking. still a waste of money IMO, but i figured i'd at it anyway.



http://www.mariahmotorsports.com/engine/en...riah_airbox.htm

DriftSeshRx7

when i finally got the air sensor adapter i put my cone on. there were no brackets to hold the mas air sensor from just laying on everything. i had to find some thin sheet metal then i cut a strip about 3 feet long and inch and a half wide and then bent it to wrap around the air sensor and then it bolted down to one of the existing brackets to the origional airbox. i then made bolts that screwed into the bracket to act as tensioners to the mas air sensor to keep it snug in the bracket. i will post pics of it asap.



this is for all of the others who have came to the point where a home made bracket is required and hopefully will give u an idea

Dorifc3s

um how bout that thing where they make the brake duct to get cold air?